|
Pro-10G Cell Phone and GPS Bug Detector
When you need a detection device that is capable of honing in on a camera, GPS tracker that has been planted on your vehicle, or a tapped land line, look no further. The DD804 offers more than one feature for zeroing in on your threats so that you are armed with ability to remove them. You're looking at the latest model of The Hunter camera detector. This is a professional camera and wireless tap sweeping device that will not let you down.
Features
Detects all GSM Bugs including Baby-Monitors/GSM Alarm/GSM Bugs
Detects all Cellular GSM/GPRS/EDGE/3G/4G Video Cameras & Listening Bugs
Detection Frequencies: GSM 880-915MHz, CDMA 824-849MHz, WCDMA (1920-1980MHz), and DCS (1710-1785MHz)
Detects Transmitting Spy Phones
Detects GPS Trackers while Transmitting
Detects Bluetooth Active Bugging Devices
Detects Spy Phones with Active Bluetooth/Wi-Fi
Ultra Sensitive will detect signals from up to 40 feet
Features 10 bar strength display
Technical Specs
Radio Frequency Response 10MHz ~ 10GHz
Analog, Digital, WiFi, Cellular GSM/GPRS/EDGE/3G/4G signals all will set off alarms.
Detection Frequencies: GSM 880-915MHz, CDMA 824-849MHz, WCDMA (1920-1980MHz), and DCS (1710-1785MHz)
Digital ‘Burst’ Signal Detect for all GSM/3G/4G Trackers/SMS(Text) detection
Detects:
Series and Parallel transmitters
Transmitting GPS trackers (only when GPS device is transmitting signal location)
Devices on internet phone and IP phone
Prevents:
Wire telephone tapping
Laser tapping using a white noise generator
Recordings of a voice recorder, tape, digital and parabolic reflector using white noise generator
Product Dimensions: 2.25" x 4.75" x 1.00"
Includes
Detection Device Unit
Telephone Line Adaptor
Head Set
1-9 Volt Battery
Quick start guide and instructions
Standard shipping is FREE for all retail orders totaling $100.00 or more! (48 Continental US orders only) Flat rate of $8.50 shipping applies to orders under $100.00
|
339.95 |
|
|
Rapid Deployment Eavesdropping Kit
Protect from eavesdropping using 4 of our J1000 Rapidly deploy this kit anywhere you feel threatened by eavesdroppers. The J1000 creates an additional barrier of noise interference making it possible to mask your conversation when confidentiality is necessary. DD804 finds all the RF so you can decide which is good and which is bad the Spyfinder Pro SF-103P finds hidden cameras quickly and easily.
The Ultimate kit for evesdropping, J1000 helps prevent someone from recording converstaions, the DD804 is a mutlit use RF detetion device and the Spyfinder pro will help find camera lenses even when not transmitting.
J1000 White noise Generator
Protection from eavesdropping meets the blended performance of this handheld, battery operate White Noise Generator. The J1000 creates an additional barrier of noise interference, reaching out farther than other models, making it possible to mask your conversation when confidentiality is necessary.
PRO-10G Cell Phone and GPS Bug Detector - DD804 for RF detection
Detects all GSM Bugs including Baby-Monitors/GSM Alarm/GSM Bugs
Detects all Cellular GSM/GPRS/EDGE/3G/4G Video Cameras & Listening Bugs
Detection Frequencies: GSM 880-915MHz, CDMA 824-849MHz, WCDMA (1920-1980MHz), and DCS (1710-1785MHz)
Detects Transmitting Spy Phones
Detects GPS Trackers while Transmitting
Detects Bluetooth Active Bugging Devices
Detects Spy Phones with Active Bluetooth/Wi-Fi
Ultra Sensitive will detect signals from up to 40 feet
Features 10 bar strength display
Spy Finder Pro - SF-103P
The SpyFinder Pro is a lightweight battery powered device that allows you to quickly identify and locate a camera by using an array of ultra-bright LED's. When the camera is found it is highlighted to the user, where it appears as a flickering bright spot of light. The SpyFinder will find any hidden camera transmitting or not. It’s so small you can carry it in your purse, suitcase or briefcase to have it with you at all time.
Included:
Manual
4x White noise Generator
Waterproof Carrying Case
1 x SF-103P
1x DD804
Standard shipping is FREE for all retail orders totaling $100.00 or more! (48 Continental US orders only) Flat rate of $8.50 shipping applies to orders under $100.00
|
1399.00 |
|
|
M1-PRO Near Field Receiver Detection Kit
M1-PRO Analogue and Digital Bug Detector from 0 KHz - 20 Ghz TSCM Multifunction Kit detector is a light weight, high-tech multi-functional handheld detection device designed for TSCM professionals. M1-PRO is for anyone serious about their privacy and demands quality performance.
Manufactured for Security Professionals as a Multi Electronic Frequency Finder (MEFF M1-PRO), this is the new Near Field detector for the TSCM professional or anyone looking for known, unknown, illegal, disruptive, or interfering transmissions.
Designed and built in Italy for Agencies, Military and now available to Businesses, Celebrity and Executive protection details, C-Suite Executives, High net worth individuals. This Analog and digital multifunction detector M1-PRO is designed and manufactured to the highest quality standards possible by and for TSCM Professionals.
M1-PRO has special functions, including the possibility of measuring the distance of the detected signal down to cm. Equipped with an array of antennas such as; laser listening device and infrared microphone detection, thermal antenna for heat detection, Audio Vox bug antenna, GPS antenna, probe to detect micro cameras even if they are switched off, In addition to detecting frequencies up to 20 Ghz analog and digital.
Detecting hidden high-tech surveillance devices used by foreign agencies, terrorists or criminals is now more difficult. However, with the next generation M1-PRO Multiple Detection System, the operator will find hidden devices, be they wireless or wired, using its range of smart probes that are tuned to detect these hidden threats from 0KHz up to 20KHz. GHz. The system takes the operator to the hidden threat with its distance measurement tool that locates the location of hidden transmitters or transmission link such as a GSM LTE 2G 3G 4G 5G WIFI mobile phone Bluetooth and audio or video devices. Real-time analysis data is logged and stored directly in the system for immediate identification of current or historical threats.
M1-PRO Dectects:
Hidden broadcast spy equipment in your home, car, office or any environment
GPS-Lojack locators installed in cars and vehicles
Sending and receiving SMS from mobile phones, Internet access signals from mobile phones
Suspicious radio signals in the environment
Hidden wireless cameras
Mini earphones in transmission
Jammer (signal jammers)
Spying devices also turned off and not powered
Spying devices turned on not transmitting, laser listening devices, GPS Tracking equipment, every type of transmitting listening devices
Applications:
Corporate security surveys for illegal, unauthorized, or threatening transmitters.
Measuring or detecting acoustic leakage or ultrasonic mechanical vibrations.
Detection of all WiFi, bluetooth, cell phones, illicit transmitters, etc. Interference detection and troubleshooting.
Contraband detection in correctional facilities
RF research and development
Wireless industry developers
Hobbyists and RF enthusiasts
Educational institutions.
Perfect equipment for all Private Investigators,
Corporate & Retail Security
TSCM professionals.
Jammer Detection (Disturbers)
Full Band Detector: detects all analog and digital frequencies from 0 to 20 Ghz. It also detects GSM, 2G, 3G, 4G, 5G, LTE, 2.4Ghz / 5Ghz wifi, Bluetooth mobile bands.
GSM 900/1800 MHz: specific function for the detection of classic GPS. Very comfortable in the use of cars.
Wifi: searches for wifi devices in transmission.
Magnet: useful for locating magnetized GPS even when switched off
Spectrum detection from 0 Khz - 20 GHz, covering all communication frequency bands currently used internationally and nationally
Scan speed of 30 microseconds, to ensure that all signals are acquired in real time
Omnidirectional antennas detect signals in every direction
Detection of GPS magnetized off and not powered
The integrated thermographic antenna identifies sources of heat generated by lighted warning devices
The T1 antenna forces the locators in standby and programmed to transmit the signal to be detected
The T2 antenna detects laser microphones and infrared microphones
The T4 probe detects micro cameras on, off, not powered and invisible black infrared cameras (used by spy cameras).
Android APP will give you the possibility to: -
Measure the distance of the detected signals in cm - Measure the detected signal in dB using a graph - Represent the detected signal in cm through the dB on the graph - H24 monitoring of signals with event log - Show on the graph the disturbance detected by a running jammer
Compact portable and lightweight device
Specifications:
Detection mode to be selected on the detector: Full Band Analog and Digital Detector, GPS, Wifi and Magnet.
Thermographic detection to identify hidden spy devices
Detection of turned off micro cameras and occult black infrared cameras
Forced activation mode of GPS and Audio Bugs in Stand bye and programmed in delayed mode Measure the detected signal in dB using the graph + Logger •
Detection of laser and infrared microphones
Sensitivity adjustment to reduce or increase the detection range
H24 monitoring of signals with event log
Lojack GPS Trackers Detection
The signal strength is divided into 16 segments, which can effectively confirm the signal strength and distance of the transmission signal source.
The detection sensitivity is divided into two sections (high and low) ranging from 0 cm to 30 meters (depending on the situation).
Wide field detection with absolute precision
Dynamic range 68 dBm
Modes: beep and mutevice
T1 antenna forces the GPS Tracker locators to wake up from stand bye and programmed to transmit the signal to be detected
T3 antenna forces the audio bugs to wake up from stand bye and programmed to transmit the signal to be detected
T4 probe detects micro cameras on, off, not powered and invisible black infrared cameras (used by spy cameras)
Omnidirectional antennas detect signals in every direction
Directional antenna locates equipment in a specific point
Integrated thermographic antenna identifies heat sources generated by lighted warning devices Height adjustable sensitivity
Working time: 8 hours (based on how it is used)
Power: 1200mW (maximum), 400mW (average)
Input voltage: 500mA 5V
2500mAh high-density lithium battery capacity
Charging interface: TYPE-C
Charging time: 3/4 hours
2.6 inch LCD screen
Materials: Plastic Machined with Finishes and Special Painting
Designed and Made in Italy
Includes:
Military Shockproof Suitcase Case
1 M1-PRO detector
1 Probe (T4)
1 Thermographic Probe
2 Omini directional antennas
1 Directional Antenna
3 Antennas (T1 - T2 - T3)
1 Charging Cable
1 cable for APP Andorid only
Manual
Standard shipping is FREE for all retail orders totaling $100.00 or more! (48 Continental US orders only) Flat rate of $8.50 shipping applies to orders under $100.00
|
4875.00 |
|
|
Credit Card Size Bug Detector
The RD-30 is an updated version of the popular RD-10. The tiny multi-functional RF detection device is equipped with the ability to find transmitting and non-transmitting cameras. Small enough to take anywhere, this handy tool is the perfect surveillance sweep companion.
Features
Quickly find hidden cameras using the hidden camrea lens finder
Can be used as wireless audio bugs sweeper
Extremely small pocket-sized and light weight detector
4 section light scale to show RF signal strength
Vibration detection mode for complete discreet operation
20MHz to 6GHz wide scanning range
Camera finder lens for wired or wireless cameras detection
LawMate Part #RD-30
Specifications
Frequency Range 20MHz - 6GHz
Camera Finder
Low and High Sensitivity
Vibration mode
AAA battery powered
Detects RF signals
Dimensions: 3.25” L x 2” W x 0.625” H
Includes
6 AAA batteries
Quick Guide
Standard shipping is FREE for all retail orders totaling $100.00 or more! (48 Continental US orders only) Flat rate of $8.50 shipping applies to orders under $100.00
|
199.00 |
|
|
Andre Advanced Electronic Bugging Detector
The ANDRE is a handheld broadband receiver that detects known, unknown, illegal, disruptive, or interfering transmissions. The ANDRE locates nearby RF, infrared, visible light, carrier current, and other types of transmitters. Access to eavesdropping and electronic bugging devices is becoming easier and more affordable. Quickly and discretely mitigate these threats using a wide range of accessories included in the ANDRE Advanced Kit that are specifically designed to receive transmissions across a 1 kHz to 6 GHz frequency range.
Technical security specialists will appreciate the portability and responsiveness of the ANDRE
HISTOGRAM DISPLAY
The ANDRE features a signal strength histogram displaying RF levels over user-selected time intervals ranging from 5 seconds to 12 hours. Observe differences between (a) digital, (b) analog, and (c) burst signals and set alert thresholds.
SIGNAL INFORMATION AND BAND DETAILS
The ANDRE frequency counter automatically generates a signal list from the strongest signals. Signal frequencies are listed beginning with the strongest signal and can be designated as threatening, friendly, or unknown. Doubletapping a signal provides more details including band classification information.
AUDIO MODE
The ANDRE can demodulate and playback live analog audio. Ten second audio files can be recorded, stored, and played back. The live audio screen displays a bar graph showing received signal strength.
POST-INVESTIGATION RESOURCES
Gather data throughout an investigation for further analysis following a sweep. Review time chart screenshots, playback demodulated audio, and download captured signal lists on any PC while writing your report
APPLICATIONS
Emissions detection of WiFi, bluetooth, cell phones, illicit transmitters, etc. Interference detection and troubleshooting Contraband detection in correctional facilities, RF research and development, Wireless industry developers, Hobbyists and RF enthusiasts, Educational institutions, Corporate security surveys for illegal, unauthorized, or threatening transmitters, Measuring or detecting acoustic leakage or ultrasonic mechanical vibrations.
Specifications:
RF DETECTOR: Sensitivity: -75 dBm for 3 GHz frequency -85 dBm for probes providing frequency at 500 MHz Stepped attenuation control: 30dB, 20dB, 10dB, Auto, off
AUDIO: Built-in speaker and external headphones with adjustable volume control
DISPLAY 3.5” (4 cm) capacitive touch screen
INPUT/OUTPUT:USB data port for software upgrades and file transfer
POWER Input: USB internal charger Batteries: 3400 mAh lithium-ion rechargeable battery (2 included), USB recharger Run time: >5 hours (typical)
Included:
Whip Antenna* 30 MHz - 6 GHz
VLF Loop* 10 kHz - 30 MHz
Locator Probe 20 MHz - 6 GHz
Concealed Antenna 750 MHz - 6 GHz
Acoustic Leakage Detector 300 Hz - 20 kHz
Audio Transformer 300 Hz - 20 kHz
Carrier Current Probe* 100 kHz - 60 MHz
Log Periodic Antenna 500 MHz - 6 GHz
Infrared/Visible Light Probe (built-in)* 1 kHz - 70 MHz
Standard shipping is FREE for all retail orders totaling $100.00 or more! (48 Continental US orders only) Flat rate of $8.50 shipping applies to orders under $100.00.
|
4295.00 |
|
|
Andre Basic Electronic Bug Detector
The ANDRE is a handheld broadband receiver that detects known, unknown, illegal, disruptive, or interfering transmissions. The ANDRE locates nearby RF, infrared, visible light, carrier current, and other types of transmitters. Access to eavesdropping and electronic bugging devices is becoming easier and more affordable. Quickly and discretely mitigate these threats using a wide range of accessories included in the ANDRE Basic Kit that are specifically designed to receive transmissions across a 1 kHz to 6 GHz frequency range.
Technical security specialists will appreciate the portability and responsiveness of the ANDRE
The Andre Basic come with 4 probes see the Andre Advance for complete kit
HISTOGRAM DISPLAY
The ANDRE features a signal strength histogram displaying RF levels over user-selected time intervals ranging from 5 seconds to 12 hours. Observe differences between (a) digital, (b) analog, and (c) burst signals and set alert thresholds.
SIGNAL INFORMATION AND BAND DETAILS
The ANDRE frequency counter automatically generates a signal list from the strongest signals. Signal frequencies are listed beginning with the strongest signal and can be designated as threatening, friendly, or unknown. Doubletapping a signal provides more details including band classification information.
AUDIO MODE
The ANDRE can demodulate and playback live analog audio. Ten second audio files can be recorded, stored, and played back. The live audio screen displays a bar graph showing received signal strength.
POST-INVESTIGATION RESOURCES
Gather data throughout an investigation for further analysis following a sweep. Review time chart screenshots, playback demodulated audio, and download captured signal lists on any PC while writing your report
APPLICATIONS
Emissions detection of WiFi, bluetooth, cell phones, illicit transmitters, etc. Interference detection and troubleshooting Contraband detection in correctional facilities, RF research and development, Wireless industry developers, Hobbyists and RF enthusiasts, Educational institutions, Corporate security surveys for illegal, unauthorized, or threatening transmitters, Measuring or detecting acoustic leakage or ultrasonic mechanical vibrations.
Specifications:
RF DETECTOR: Sensitivity: -75 dBm for 3 GHz frequency -85 dBm for probes providing frequency at 500 MHz Stepped attenuation control: 30 dB, 20 dB, 10 dB, Auto, off
AUDIO: Built-in speaker and external headphones with adjustable volume control
DISPLAY 3.5” (4 cm) capacitive touch screen
INPUT/OUTPUT:USB data port for software upgrades and file transfer
POWER Input: USB internal charger Batteries: 3400 mAh lithium-ion rechargeable battery (2 included), USB recharger Run time: >5 hours (typical)
Included:
Whip Antenna* 30 MHz - 6 GHz
VLF Loop* 10 kHz - 30 MHz
Carrier Current Probe* 100 kHz - 60 MHz
Infrared/Visible Light Probe (built-in)* 1 kHz - 70 MHz
Standard shipping is FREE for all retail orders totaling $100.00 or more! (48 Continental US orders only) Flat rate of $8.50 shipping applies to orders under $100.00.
|
3495.00 |
|
|
Multi-Channel Detector for Wireless Protocols
Designed as a Smartphone and GPS detection devices the DD1207 offers highly sophisticated portable detection in an easy to operate handheld scanner. Capable of detecting the most common digital cellular frequencies, the system offers the ability to adjust the antenna sensitivity while either scanning the entire frequency spectrum or simply scanning one spectrum at a time, such as GSM.
Features:
Portable device for the inspection and location of wireless sources
6 channels of detection for different kinds of protocols
-Detection of GSM/CDMA/3G/4G
-Detection of Bluetooth/Wi-Fi/Wi-Max
-Can be used for tracing both regular sources and illegal eavesdropping devices
-6 bar graphs with 10-segments each, for accurate location of RF sources
-4 modes: Silent, Vibration, Visual and Listen
-2 levels of sensitivity (attenuator)
-Extra display shows which signal type has been detected
-Durable metallic body
-Microprocessor controlled
-Setup mode with selection the threshold level for vibration.
Detect the following kinds of bugging devices:
-GSM baby-monitors/GSM alarm/GSM bugs
-GSM/GPRS/EDGE/3G video cameras
-GSM Spy phones
-GPS Trackers
-Bluetooth bugging devices
-Spy phones with Bluetooth/Wi-Fi
-Wi-Fi/Wi-Max bugging devices
-Wireless videocameras 2.4 Ghz
Detection range is 30 feet
Technical Specs
Detection range is 30 feet
CDMA 824-849 MHz
GSM 880-920 MHz
GSM (DCS) 1710-1790 MHz
WCDMA, 3G, GSM (PCS), DECT 1920-2000 MHz
Bluetooth, Wi-Fi 2400-2480
Wi-Max 3000-7000 MHz
Antenna 2 Omni-directional antennas
Detection distance 1-10 meters
operation time 10-15 hours
power 2 AAA
Box Size 7 x 5 x 1.50
Unit Size 2.75 x 4.75 x .50
Weight 1.00
Detects CDMA, GSM, WCDMA/3G, 4G, Bluetooth/Wi-Fi, and Wi-Max
Frequency range
Includes:
Manual
Cleaning Cloth
2 Antennas
Screw driver
2 Batteries size AAA
Detector
Standard shipping is FREE for all retail orders totaling $100.00 or more! (48 Continental US orders only) Flat rate of $8.50 shipping applies to orders under $100.00
|
795.00 |
|
|
Andre Duluxe Electronic Bugging Detector
The ANDRE is a handheld broadband receiver that detects known, unknown, illegal, disruptive, or interfering transmissions. The ANDRE locates nearby RF, infrared, visible light, carrier current, and other types of transmitters. Access to eavesdropping and electronic bugging devices is becoming easier and more affordable. Quickly and discreetly mitigate these threats using a wide range of accessories included in the ANDRE Advanced Kit that are specifically designed to receive transmissions across a 10 kHz to 12 GHz frequency range. The Andre Deluxe includes all the accessories found in the basic and advanced models plus the flowing Down Converter Antenna (500 MHz – 12 GHz), Ultrasonic Probe (15 kHz – 80 kHz), Directional Antenna (70 MHz – 500 MHz), Data Logging, PC Data Viewer (Data Viewer can be downloaded and allows the user to view and analyze data Logging information for report writing.), Boom Extender, Probe Tripod, IR Filter, Powered Connector Cable. the deluxe will goto 12 GHz with the down converter antenna
Technical security specialists will appreciate the portability and responsiveness of the ANDRE
HISTOGRAM DISPLAY
The ANDRE features a signal strength histogram displaying RF levels over user-selected time intervals ranging from 5 seconds to 12 hours. Observe differences between (a) digital, (b) analog, and (c) burst signals and set alert thresholds.
SIGNAL INFORMATION AND BAND DETAILS
The ANDRE frequency counter automatically generates a signal list from the strongest signals. Signal frequencies are listed beginning with the strongest signal and can be designated as threatening, friendly, or unknown. Doubletapping a signal provides more details including band classification information.
AUDIO MODE
The ANDRE can demodulate and playback live analog audio. Ten second audio files can be recorded, stored, and played back. The live audio screen displays a bar graph showing received signal strength.
POST-INVESTIGATION RESOURCES
Gather data throughout an investigation for further analysis following a sweep. Review time chart screenshots, playback demodulated audio, and download captured signal lists on any PC while writing your report
APPLICATIONS
Emissions detection of WiFi, bluetooth, cell phones, illicit transmitters, etc. Interference detection and troubleshooting Contraband detection in correctional facilities, RF research and development, Wireless industry developers, Hobbyists and RF enthusiasts, Educational institutions, Corporate security surveys for illegal, unauthorized, or threatening transmitters, Measuring or detecting acoustic leakage or ultrasonic mechanical vibrations.
Specifications:
RF DETECTOR: Sensitivity: -75 dBm for 3 GHz frequency -85 dBm for probes providing frequency at 500 MHz Stepped attenuation control: 30dB, 20dB, 10dB, Auto, off
AUDIO: Built-in speaker and external headphones with adjustable volume control
DISPLAY 3.5” (4 cm) capacitive touch screen
INPUT/OUTPUT:USB data port for software upgrades and file transfer
POWER Input: USB internal charger Batteries: 3400 mAh lithium-ion rechargeable battery (2 included), USB recharger Run time: >5 hours (typical)
Included:
Whip Antenna* 30 MHz - 6 GHz
VLF Loop* 10 kHz - 30 MHz
PC Data Viewer
Data Logging
Directional Antenna (70 MHz-500 MHz)
Ultrasonic Probe (15 kHz-80 kHz)
Down Converter Antenna (500MHz-12GHz)
Locator Probe 20 MHz - 6 GHz
Concealed Antenna 750 MHz - 6 GHz
Acoustic Leakage Detector 300 Hz - 20 kHz
Audio Transformer 300 Hz - 20 kHz
Carrier Current Probe* 100 kHz - 60 MHz
Log Periodic Antenna 500 MHz - 6 GHz
Infrared/Visible Light Probe (built-in)* 1 kHz - 70 MHz
Boom Extender, Probe Tripod, IR Filter, Powered connector cable
Standard shipping is FREE for all retail orders totaling $100.00 or more! (48 Continental US orders only) Flat rate of $8.50 shipping applies to orders under $100.00.
|
6995.00 |
|
|
Bug Detectors
If you think that someone is listening to your conversations or is watching you with a hidden camera, a bug detector will help you find the hidden microphone or camera.
Our bug detectors act as sweepers, you can turn them on and walk through a room. If any frequencies are detected the bug detector will notify you. The bug detectors below are also radio frequency (RF) scanners as well. They will detect anything putting off RF energy.
When searching your home or office for bugs be sure to search everywhere. Bugs come in many shapes and sizes some being smaller than a penny.
Bug Detector with Frequency Counter
Latest Technology in hand-held radio frequency detection. Uses the latest micro processor circuitry for the most accurate detection of wireless transmission. Built-in signal strength meter and sensitivity control. LCD screen displays actual frequency that is being detected. This unit is loaded with features.
|
|
|
iTrail Endurance GPS Tracker
Get almost a year of tracking with the iTrail Endurance using all the best cellular networks available from 2G to 5G. This 20,000mAh battery powered GPS Tracker has 265 days of stand-by power. The iTrail Endurance has built-in magnets so no extra case needed. Low price subscriptions that include world wide tracking at not extra charge with no long term commitment plus flexible cancelation.
Accurate Tracking with Long Life Stand-by Power for almost a year!
For Tracking Use our robust tracking platforms either the convenient iTrail app or web tracking platform, both perform the most the same tracking functions. Utilize geofences, alerts and reporting for device management.
iTrail app for iPhone or Android
Perfect for teen drivers, asset tracking, executive protection, any fleet vehicles and much more.
For more detail go to www.myitrail.com
Please Note: Once your tracker has been installed, it may take up to 24 hours for it to connect to Cellular Network and begin reporting. * If service is inactive , the device may need to be returned for reactivation and a reactivation fee will apply.
Features:
20,000 mAh battery for up to 265 days of tracking
Low cost plans - cancel anytime!
Real-time tracking with 4G
No Activation fee*
Stand Plans work in USA, Canada and Mexico, World wide Plans available
Unlimited Data
Vibration/Displacement/Low battery/Power off/Over Speed Alert
Remove alert
Auto Sleep Mode
Geo-fence
Arrival Alerts
Departure Alerts
Low Battery Alerts
Historical Playback
Reports
Web-Based Software
Robust App tracking
5 Built-in Magnets with 80lbs total pull
Text Message(SMS) Alerts
Share location
AGPS Cellular assisted GPS
No long term commitments to sign up and activate devices
*Re-Activation fee can apply
Specifications:
Frequency North America : LTE B2/B4/B12; WCDMA :B2/B5
AT&T, Verizon and TMobile
Networks 4G
Battery 3.7V 20000mAh
Location time Cold start 35s-80s Hot start 1s
Operating temperature -20℃~+55℃
Location Accuracy 16 Feet
IP65 water proof
On/Off Switch
Web-Based Software
PC/MAC Compatible
Included:
Device
USB Cable
Charger
Standard shipping is FREE for all retail orders totaling $100.00 or more! (48 Continental US orders only) Flat rate of $8.50 shipping applies to orders under $100.00.
|
199.95 |
|