|
iProtect Detection Wand
The iProtect 1215 brings powerful handheld detection to the DIY user. Conventional RF detectors are typically capable of discovering signals up to 4-6 GHz. Higher frequencies generally stay unstudied during sweeping procedures, unless you've invested in an expensive spectrum analyzer. This small, handheld microwave pointer-probe extends the checked frequency range during sweeping procedures up to 13 GHz.
When you are looking for High frequencies the iProtect will get the job done!
Features:
Detects bugging devices omitted by standard RF detectors
Discovers microwave signals in the range of 4-13 GHz
Detects signals not depending on their type – video, audio, digital or analogue
Built-in directed antenna
3 working modes: Normal, Vibrating and Audio
16-segment indicator for easy and precise pinpointing of the bugging device
Sensitivity controlled by attenuator
Antenna's directivity (out-of-direction attenuation) -6 dBm
Portable and durable duralumin body
Powered by just 1 AA (LR06) battery
Low power indication
Battery resource 12-25 hours
Typical signals Detected by iProtect DD1215 are Wireless microphones working on 5 GHz frequency band, Wireless video cameras 5GHz, Covert 5GHz Wi-Fi access point, Covert 5GHz Wi-Fi client device, Other surveillance (bugging devices) employing frequencies between 4-13 GHz.
Great for small sweep areas, all TSCM professional should have one their arsenal.
Specifications:
Frequency range 4000 – 13000 MHz (4-13 GHz)
Controls Power button, Mode button, ATT button
Indicators 16-segment bargraph, Vibration, Battery state (3 colors), Working mode, ATT state
Battery resource 12 – 25 hours
Current consumption Normal: 80 mA Vibrating: 180 mA Audio: 130 mA
Power source 1 x AA battery
Included:
Manual
2 AA Batteries
Standard shipping is FREE for all retail orders totaling $100.00 or more! (48 Continental US orders only) Flat rate of $8.50 shipping applies to orders under $100.00.
|
395.00 |
|
|
RF Detection and Lens Finder Kit
Never be without all the tools you need to aid in the ever growing concern for privacy. Whether you are a TSCM specialist, corporate executive or a concerned traveler. This kit can help you maintain the privacy you or your client expect. Out fitted with our very popular DD804 Pro-G10 Cell phone, GPS and RF detector, DD1215 wand high gain detector and the SF-103P Spyfinder Pro the easiest tool for finding non-transmitting hidden Cameras.
Includes
DD804: Radio Frequency from 10MHz ~ 10GHz, finds Cellphones GSM-CDMAand WCDMA
DD1215: iProtect High Frequencies detector form 4-GHZ to 13-GHZ
SP-103P: SpyFinder Pro hidden camera lens finder, no transmisson signal requried
Help clients or indivduals protect homes, offices, server rooms, hotel rooms or vehicles. The bug, camera & GPS detectors included in this kit can help assist in finding Analog or digital surveillance devices.
Never again travel without protection from hidden cameras or GPS tracking. Each device has its own specialized purpose to help locate unwanted surveillance devices.
Perfect kit for TSCM or government investigator as a add on for their investigations arsenal.
Standard shipping is FREE for all retail orders totaling $100.00 or more! (48 Continental US orders only) Flat rate of $8.50 shipping applies to orders under $100.00.
|
869.00 |
|
|
iProtect RF Wireless Detector Wand
UPGRADED to 8GHz- The iProtect RF detection wand, easily fits in user hand to conceal action while sweeping for bugs of different types. Perfect fit for both professional and novice users, simple to use, and allows operator to locate the source. Keep your conversations to yourself with the RF Detector wand.
Perfect gadget to protect your conversations! Sweep the bugs under the rug!
• Easy and quick detection of RF bugs of different types, including VHF/UHF transmitters, GSM/3G bugs, wireless video cameras, Wi-Fi audio and video transmitters, vehicle transmitters, body-carried transmitters, etc.
• 3 working modes: Normal, Vibrating, and Audio
• Wide frequency range 50-6000 MHz
• Powered just by 1 x AAA battery
• 16-segment bargraph indicator
• Physical attenuator provides ability to locate strong RF sources
• Highly sensitive to real signals without being affected by weak background radio waves
• No sensitivity loss at battery discharge
• Low power indication
• Is able to detect modern communications, including GSM, 3G, 4G (LTE), Bluetooth and Wi-Fi 2.44 and 5GHz
• High-quality detection scheme with professional RF isolation
• Reliable and tested device for different sweeping tasks
• Detects both analogue and digital transmissions
• Allows the operator to locate the source
• Vibrating signal for concealed indication of a high RF level and testing hard to access places
• Durable duralumin case
• Battery resource 10-20 hours
Specifications:
• Frequency 50MHz to 8GHz
• Power: 1 x AAA Battery
• Consumption: 100mA (stand-by) 200mA (full bar graph)
• Dimensions:172x19 mm
• Battery Resource: 10-20 hours
• Indicator: ATT state
• Indicator: Working Mode
• Indicator: Battery State (3 colors)
• Indicator: Vibration
• Indicator: 16-segment bar graph
• Controls: Power button; MODE button; ATT button
• Working Modes: Normal; Vibrating; Audio
Included:
Lanyard attachement clip
Battery
Manual
Standard shipping is FREE for all retail orders totaling $100.00 or more! (48 Continental US orders only) Flat rate of $8.50 shipping applies to orders under $100.00
|
295.00 |
|
|
iProtect RF Wireless Signal Detector Wand
The iProtect RF detection wand, easily fits in user hand to conceal action while sweeping for bugs of different types. Perfect fit for both professional and novice users, simple to use, and allows operator to locate the source. Keep your conversations to yourself with the RF Detector wand.
New and Improved Now Detects Up To 8GHz Which Make This The Perfect gadget to protect your conversations! Sweep the bugs under the rug!
Easy and quick detection of RF bugs of different types, including VHF/UHF transmitters, GSM/3G bugs, wireless video cameras, Wi-Fi audio and video transmitters, vehicle transmitters, body-carried transmitters, etc.
* Detects both analog and digital transmissions
* Vibrating signal for concealed indication of a high RF level and for testing hard to access places
* High-quality detection scheme with professional RF isolation
* 3 working modes: Normal, Vibrating, and Audio
* Wide frequency range 50MHz-8GHz
* 16-segment bargraph indicator
Physical attenuator provides ability to locate strong RF sources
* Highly sensitive to real signals without being affected by weak background radio waves
* No sensitivity loss at battery discharge
* Is able to detect modern communications, including GSM, 3G, 4G (LTE), Bluetooth and Wi-Fi 2.44 and 8GHz
* High-quality detection scheme with professional RF isolation
* Durable duralumin case
* Powered by 1 x AAA battery
* Battery resource 10-20 hours
* 1 year warranty
Specifications:
Frequency Range: 50MHz to 8GHz
Indicator: 16-segment bar graph
Indicator: ATT state
Indicator: Working Mode
Indicator: Battery State (3 colors)
Indicator: Vibration
Controls: Power button; MODE button; ATT button
Working Modes: Normal; Vibrating; Audio
Consumption: 100mA (stand-by) 200mA (full bar graph)
Battery Resource: 10-20 hours
Power: 1 x AAA Battery
Dimensions: 6.625” L x 0.625” W x 0.625” H
Weight: 0lb 2oz
Power Type:
Battery
Signal Detection:
3G
4G
GPS
Bluetooth
Wi-Fi
Digital Signals
Detection Range:
Up to 12Ghz
Included:
Lanyard
Manual
Battery
Standard shipping is FREE for all retail orders totaling $100.00 or more! (48 Continental US orders only) Flat rate of $8.50 shipping applies to orders under $100.00.
|
329.95 |
|
|
Detection and Counter Surveillance Kit
Feel safe, secure and protect your environment and information from outside threats. We've created a detection and counter surveillance kit that will aid and identify surveillance threats of any kind.
No job is too small or too big with this detection kit on hand. Comes standard and nicely organized in tactical case including the iProtect DD1216, DD1207, DD1206, DD1200 and DD12051. Mission ready, this case makes it easy to keep track and transport your detection devices regardless of the job or if you don't need the whole kit you can take whatever you need with you on-the-go. All devices are small and portable in size.
FREQUENCY RANGE: 50MHz-12GHz
Includes:
DD1216: iProtect 3-Band RF Detector [50MHz-12GHz]
DD1207: iProtect Wireless Detector [824MHz-7000MHz]
DD1206: iProtect Digital RF Detector [50MHz-12GHz]
DD1200: iProtect Camera Finder [Finds Non Transmitting Cameras]
DD12051: iProtect RF Wireless Signal Wand [50MHz-8GHz]
The Bug, Camera & GPS Detectors included help assist in sweeping and locating modern (digital) and classic (analog) forms of surveillance devices. Locate hidden cameras, listening devices or GPS trackers that could be invaiding your private space at home, the office or vehicle.
Secure your home, office and vehicles. Each device has specialized features, adjustable settings, threat level indicators to help uncover and find unwanted surveillance devices. Each one designed to search covertly, LED, Sound or Graph Indicators will help you narrow down the search and type of devices to look out for based upon what's registering. Be sure to turn off all authorized devices in the environment to not impead the investigation. All electronics emit a frequency, these anti-surveillance devices will measure and monitor those in range giving off a RF signature of 50MHz-12GHz.
Stronger the singal, closer the device. Detection devices pick up the RF frequencies given off by Cellular, Bluetooth and WiFi spy gadgets that could be hidden in your everyday items. [GSM, 2G, 3G, LTE, Bluetooth, 2.4GHz & 5GHz WiFi and Wi-Max]
Standard shipping is FREE for all retail orders totaling $100.00 or more! (48 Continental US orders only) Flat rate of $8.50 shipping applies to orders under $100.00.
|
2989.00 |
|
|
iProtect 3-Band RF Detector
One Device shows 3 different types of detection at once displayed in a bar graph. Registers VHF/UHF 50-700 MHz, Mobile and Wireless 700 MHz- 3 GHz and Microwave and Wireless 3-12 GHz.
Having all three on the screen visibly shows what type of signals are being detected. This device allows the operator to set an alarm to reject background noise to a certain threshold, so it will only detect from at above the frequency set.
FREQUENCY RANGE: 50 MHz to 12 GHz
Features:
Detects all types of RF transmissions including analog and digital, audio and video
Frequency range 50 MHz – 12 GHz
Separation into 3 bands helps to avoid loss of sensitivity near strong interference
ALL BANDS and ONE BAND display modes
High sensitivity to 3G and wireless protocols (Wi-Fi, Bluetooth, etc.)
Working modes: SILENT, AUDIO and ALARM
Adjustable alarm threshold
Portable, reliable and easy-to-use
The BARGRAPH shows the momentary RF level
The HISTOGRAM displays the RF signal over 5 seconds (in 'ONE BAND' display mode)
The SIGNATURE displays the possible signal type
Built-in directed microwave antenna
Shock-resistant CNC milled duralumin housing
Rechargeable Li-Ion battery with resource of 6 hours
Controlled by microcontrollers
2x built-in OLED displays
Specifications:
Frequency Range: 50 MHz – 12 GHz, Band 1: 50 – 700 MHz, Band 2: 700 MHz – 3 GHz, Band 3: 3GHz – 12 Ghz
Charging Port: USB
Battery Recharge Time: 4 hours
Battery Resource: 6 Hours
Battery: Recharable Li-Ion 1150mAh @ 3.7v
Threshold settings: 48 steps
Micorwave Antenna: Built-in (band 3)
RF Connector: SMA (band1 & 2), 50Ohm
Working Modes: Silent, Audio, Alarm
Display Modes: All Bands, One Band
Indicators: Main Display & Status Display
Operating Temp: 14-113°F
Included:
Detector
Rod Antenna
Mini-USB Charging Cable
Standard shipping is FREE for all retail orders totaling $100.00 or more! (48 Continental US orders only) Flat rate of $8.50 shipping applies to orders under $100.00.
|
795.00 |
|
|
Video Pen with Motion Detection
There are lots of Pen Camera recorders on the the market today but there are not a lot of quality Pen Camera recorders. With our Pen Camera you get clear true HD quality recording, motion detection and a functioning realistic pen. One touch turns it on or off making it easy to capture video on the go. Our Pen Camera can hold up to 128 GB memory card and has an easy slide on the back to choose between motion or continuous recording modes.
If you are looking for quality over price our Pen Camera is the perfect choice and is packed with great features!
HD (720P) Video recording 1280x720
Two recording mode continuous ( 1 hour) or Battery saving motion detection recording (1.5 hours on internal battery)
The LED lights turn off for Covert recording
Perfect for body worn surveillance
One touch turns the unit of and one
Date and Time stamp
Easy playback and storage using USB
Store using micro TF card up to 128 GB (not included)
Use the USB cable to for extended recording or surveillance time
Great for body worn surveillance, sports videos, Law enforcement, PI's, concerned parents
Specifications:
Video Formate: MJPG
Bit Rate: 16.4 Mbps
Frame Rate Max 30fps
Battery power indicator
Battery Rechargeable Lithium Polymer
Battery Charging time 1.5 hours
Memory up to 128 micro TF Card
Recording times 2 hrs/16GB , 4 hrs/ 32GB; 8 hrs/64GB, 16hrs/128GB
Video Resolution: 1280x720
Included:
USB Cable
1 pen refill
manual
Standard shipping is FREE for all retail orders totaling $100.00 or more! (48 Continental US orders only) Flat rate of $8.50 shipping applies to orders under $100.00
|
149.00 |
|
|
iProtect Multi-Channel Wireless Detector
The first of its kind, all-in-one detector that is easy to use for any TSCM level. Find GPS trackers, cell phone signals and other wireless protocols easily using this Multi-Channel Digital Detector. The 1217 will pick up with higher accuracy 2,3,4 and 5G mobile bands. Other detection devices become overloaded with signals from the base station rendering them practically unusable in large cities. The DD1217 is designed to avoid interference from base station.
Why do we need such high end hand held detection devices?
Searching for the illegal use of mobile / Cell signals is becoming an increasingly important task during counter surveillance sweeping. Numerous eavesdroppers transmit information via mobile/Cell networks. The mass production of components for developers such as GSM, 3G, 4G/LTE and 5G modules, enables them to develop cheap and quick surveillance methods which have ultra-high quality sound, video or location transmission. Hidden cameras camouflaged as household appliances, toys or interior objects will most likely transmit data via mobile networks or Wi-Fi. Spy listening devices quite often have a slot for SIM-cards to enable them to function on a cellular network. A GPS tracker is a device that is installed in a vehicle and transmits its location by sending coordinates via mobile communication.
The DD1217 is an unique hand held detection device:
The user is able to see exactly which signal has been detected displayed right on the unit. This greatly improves the ability to distinguish suspicious signals from external interferences and enables the user to perform a physical search for a certain transmitter. Such ability is not available for wide-band detectors that combine all the signals. The iProtect 1217 has a selective detector, can inspect one separate band, which is why it is irreplaceable during professional searches. One more important advantage of the iProtect 1217 is the TRACKER mode (searching for GPS trackers). In this mode, the device is adjusted for detecting only mobile signals and accumulates a history of located periodic sending of data with coordinates.
Able to detect mobile and wireless signals at a much greater distance compared to conventional RF detectors (at least 10 times more)
Selective: interference resistant and with a high sensitivity
Has worldwide coverage of mobile standards – can detect all existing bands of GSM, CDMA, 3G, 4G/LTE and 5G in the range up to 6 GHz
Able to detect all types of wireless signals, including Wi-Fi 2.4 GHz, Bluetooth, Wi-Fi 5 GHz, DECT, ISM 434MHz, ISM 968 MHz and ISM 915 MHz
Detection of at least 26 mobile and wireless bands
Can be adjusted to the frequency allocation of the country of use
A selective multi-band principle of work informs the user of exactly which signals were found
The mode of analysis of a certain band facilitates the physical search of a transmitter
A separate mode for the detection of GPS trackers with history accumulation (TRACKER)
ALARM function warns the operator about exceeding the threshold, both with sound and visually
43 threshold levels for setting optimal sensitivity
Can be set up for specific tasks, for example, for the detection of Wi-Fi only, etc.
Operation modes: ALL BANDS (detection on all bands); GROUP (detection on the selected group of bands); BAND (analysis of a separate band); TRACKER (detection of GPS trackers)
Two antenna inputs and two antennas in the set for ensuring maximum sensitivity
The high-band directional antenna facilitates locating of transmitters above 2400 MHz
The built-in rechargeable battery provides an operational time of up to 5 hours
Rechargeable via USB
Technical Specifications:
Number of Bands: 26 Power:
Built-in rechargeable battery 6800 mAh 3.7V
Power supply source: USB 5V
Operating and control elements: Joystick: move left-right, up-down, threshold adjustment, mode selection Button POWER OFF: switch off Button
US (bands of the USA) EU (European bands) Total (all bands)
Sound signals: Alarm, depression of buttons
Number of alarm threshold levels: 43
Alarm Function: Visual or Audio
Operations modes: ALL BANDS ( detects all bands), GROUP (detects on the selected group of bands), BAND (analysis of a separate band); TRACKER (detection of GPS tracker)
Average Sensitivity; -60 dBm
Antenna inputs: Input 1 SMA, 2400-6000MHz
Battery time up to 5 hours
Signal Dectection:
Wi-Fi
3G
4G
5G
GPS
CDMA
GSM
Bluetooth
Detection Range:
Up to 6 Ghz
Power Type:
Battery
Included:
DD1217 Detector
High-band antenna Micro-Pointer x 1
Low-band rod antenna x 1
Charging Cable USB Type C
Angle adapter SMA x 2
Hard case for transportation
Standard shipping is FREE for all retail orders totaling $100.00 or more! (48 Continental US orders only) Flat rate of $8.50 shipping applies to orders under $100.00.
|
3245.99 |
|
|
M1-PRO Near Field Receiver Detection Kit
M1-PRO Analogue and Digital Bug Detector from 0 KHz - 20 Ghz TSCM Multifunction Kit detector is a light weight, high-tech multi-functional handheld detection device designed for TSCM professionals. M1-PRO is for anyone serious about their privacy and demands quality performance.
Manufactured for Security Professionals as a Multi Electronic Frequency Finder (MEFF M1-PRO), this is the new Near Field detector for the TSCM professional or anyone looking for known, unknown, illegal, disruptive, or interfering transmissions.
Designed and built in Italy for Agencies, Military and now available to Businesses, Celebrity and Executive protection details, C-Suite Executives, High net worth individuals. This Analog and digital multifunction detector M1-PRO is designed and manufactured to the highest quality standards possible by and for TSCM Professionals.
M1-PRO has special functions, including the possibility of measuring the distance of the detected signal down to cm. Equipped with an array of antennas such as; laser listening device and infrared microphone detection, thermal antenna for heat detection, Audio Vox bug antenna, GPS antenna, probe to detect micro cameras even if they are switched off, In addition to detecting frequencies up to 20 Ghz analog and digital.
Detecting hidden high-tech surveillance devices used by foreign agencies, terrorists or criminals is now more difficult. However, with the next generation M1-PRO Multiple Detection System, the operator will find hidden devices, be they wireless or wired, using its range of smart probes that are tuned to detect these hidden threats from 0KHz up to 20KHz. GHz. The system takes the operator to the hidden threat with its distance measurement tool that locates the location of hidden transmitters or transmission link such as a GSM LTE 2G 3G 4G 5G WIFI mobile phone Bluetooth and audio or video devices. Real-time analysis data is logged and stored directly in the system for immediate identification of current or historical threats.
M1-PRO Dectects:
Hidden broadcast spy equipment in your home, car, office or any environment
GPS-Lojack locators installed in cars and vehicles
Sending and receiving SMS from mobile phones, Internet access signals from mobile phones
Suspicious radio signals in the environment
Hidden wireless cameras
Mini earphones in transmission
Jammer (signal jammers)
Spying devices also turned off and not powered
Spying devices turned on not transmitting, laser listening devices, GPS Tracking equipment, every type of transmitting listening devices
Applications:
Corporate security surveys for illegal, unauthorized, or threatening transmitters.
Measuring or detecting acoustic leakage or ultrasonic mechanical vibrations.
Detection of all WiFi, bluetooth, cell phones, illicit transmitters, etc. Interference detection and troubleshooting.
Contraband detection in correctional facilities
RF research and development
Wireless industry developers
Hobbyists and RF enthusiasts
Educational institutions.
Perfect equipment for all Private Investigators,
Corporate & Retail Security
TSCM professionals.
Jammer Detection (Disturbers)
Full Band Detector: detects all analog and digital frequencies from 0 to 20 Ghz. It also detects GSM, 2G, 3G, 4G, 5G, LTE, 2.4Ghz / 5Ghz wifi, Bluetooth mobile bands.
GSM 900/1800 MHz: specific function for the detection of classic GPS. Very comfortable in the use of cars.
Wifi: searches for wifi devices in transmission.
Magnet: useful for locating magnetized GPS even when switched off
Spectrum detection from 0 Khz - 20 GHz, covering all communication frequency bands currently used internationally and nationally
Scan speed of 30 microseconds, to ensure that all signals are acquired in real time
Omnidirectional antennas detect signals in every direction
Detection of GPS magnetized off and not powered
The integrated thermographic antenna identifies sources of heat generated by lighted warning devices
The T1 antenna forces the locators in standby and programmed to transmit the signal to be detected
The T2 antenna detects laser microphones and infrared microphones
The T4 probe detects micro cameras on, off, not powered and invisible black infrared cameras (used by spy cameras).
Android APP will give you the possibility to: -
Measure the distance of the detected signals in cm - Measure the detected signal in dB using a graph - Represent the detected signal in cm through the dB on the graph - H24 monitoring of signals with event log - Show on the graph the disturbance detected by a running jammer
Compact portable and lightweight device
Specifications:
Detection mode to be selected on the detector: Full Band Analog and Digital Detector, GPS, Wifi and Magnet.
Thermographic detection to identify hidden spy devices
Detection of turned off micro cameras and occult black infrared cameras
Forced activation mode of GPS and Audio Bugs in Stand bye and programmed in delayed mode Measure the detected signal in dB using the graph + Logger •
Detection of laser and infrared microphones
Sensitivity adjustment to reduce or increase the detection range
H24 monitoring of signals with event log
Lojack GPS Trackers Detection
The signal strength is divided into 16 segments, which can effectively confirm the signal strength and distance of the transmission signal source.
The detection sensitivity is divided into two sections (high and low) ranging from 0 cm to 30 meters (depending on the situation).
Wide field detection with absolute precision
Dynamic range 68 dBm
Modes: beep and mutevice
T1 antenna forces the GPS Tracker locators to wake up from stand bye and programmed to transmit the signal to be detected
T3 antenna forces the audio bugs to wake up from stand bye and programmed to transmit the signal to be detected
T4 probe detects micro cameras on, off, not powered and invisible black infrared cameras (used by spy cameras)
Omnidirectional antennas detect signals in every direction
Directional antenna locates equipment in a specific point
Integrated thermographic antenna identifies heat sources generated by lighted warning devices Height adjustable sensitivity
Working time: 8 hours (based on how it is used)
Power: 1200mW (maximum), 400mW (average)
Input voltage: 500mA 5V
2500mAh high-density lithium battery capacity
Charging interface: TYPE-C
Charging time: 3/4 hours
2.6 inch LCD screen
Materials: Plastic Machined with Finishes and Special Painting
Designed and Made in Italy
Includes:
Military Shockproof Suitcase Case
1 M1-PRO detector
1 Probe (T4)
1 Thermographic Probe
2 Omini directional antennas
1 Directional Antenna
3 Antennas (T1 - T2 - T3)
1 Charging Cable
1 cable for APP Andorid only
Manual
Standard shipping is FREE for all retail orders totaling $100.00 or more! (48 Continental US orders only) Flat rate of $8.50 shipping applies to orders under $100.00
|
4875.00 |
|
|
iProtect Summit - Multi Phone Safe
Protect important or sensitive conversations from eavesdropping cell phones! Obviously, mobile phones have an infinite number of benefits for communication and business; however, they also create certain threats of private or trade secrets information being leaked. One of the potential leakage channels is the phone's microphone as it can pick up conversations without anyone’s knowledge. The SUMMIT-PHONE SAFE has been developed by iProtect information security professionals to protect against this exact type of threat.
Vulnerabilities of modern phones:
The phone can be intentionally, or covertly, ‘off-hook’ during important conversations and negotiations
Voice recording software can intentionally, or secretly, run on the smartphone
Listening software can run in a ‘stealth’ mode
Spyware can be installed on the smartphone without the owner's knowledge, allowing attackers to activate covert eavesdropping around the phone.
Smartphone apps which have access to the phone's microphone can be used for eavesdropping in cases of them having been hacked (usually messengers or social network apps) There are known cases of transmission of such software by exploiting the vulnerabilities of some messengers.
Features and advantages:
Blocks the microphone of the phone with the help of non-filterable ultrasonic interference
Efficiently prevents surround recording app from capturing conversations and sounds
The frequency of interference has been optimally selected for the best performance and defeats all existing models of smartphones.
Made attractive with natural wood stand.
The phone stays online and available for incoming calls
No illegal radio jamming
Can be powered by the external USB, or from the built-in rechargeable battery
Has 2 sensors, increasing the battery’s resource: the device starts producing interference when a phone is inserted (IN USE sensor) and a conversation is present (ACTIVITY sensor)
Is compatible with all types of phones
Accommodates from 1 to 4 phones.
Use in board rooms, R&D labs anywhere you need to secure conversations and meetings.
Specifications
Type of interference: Ultra sound, inaudible frequency
Battery resource: >10 hours Recharging time: 12 hours
Connector: USB Type C
Capacity: Up to 4 phones
Compatible phones Height up to 7inchs
Power of noise <2 W in the active area
Power Built-in rechargeable battery and USB 5V
Indicators lights
Indicators: BATT, ACTIVE, IN USE
Sensors: IN USE , ACTIVE
Current consumption: 500 mA (noise mode) 6 mA (stand-by mode)
Battery: Li-Ion, 3.7 V, 6800 mAh
Download Manual
Includes:
USB Type C Cable and Manual
Standard shipping is FREE for all retail orders totaling $100.00 or more! (48 Continental US orders only) Flat rate of $8.50 shipping applies to orders under $100.00
|
945.00 |
|