|
Multi-Channel Detector for Wireless Protocols
Designed as a Smartphone and GPS detection devices the DD1207 offers highly sophisticated portable detection in an easy to operate handheld scanner. Capable of detecting the most common digital cellular frequencies, the system offers the ability to adjust the antenna sensitivity while either scanning the entire frequency spectrum or simply scanning one spectrum at a time, such as GSM.
Features:
Portable device for the inspection and location of wireless sources
6 channels of detection for different kinds of protocols
-Detection of GSM/CDMA/3G/4G
-Detection of Bluetooth/Wi-Fi/Wi-Max
-Can be used for tracing both regular sources and illegal eavesdropping devices
-6 bar graphs with 10-segments each, for accurate location of RF sources
-4 modes: Silent, Vibration, Visual and Listen
-2 levels of sensitivity (attenuator)
-Extra display shows which signal type has been detected
-Durable metallic body
-Microprocessor controlled
-Setup mode with selection the threshold level for vibration.
Detect the following kinds of bugging devices:
-GSM baby-monitors/GSM alarm/GSM bugs
-GSM/GPRS/EDGE/3G video cameras
-GSM Spy phones
-GPS Trackers
-Bluetooth bugging devices
-Spy phones with Bluetooth/Wi-Fi
-Wi-Fi/Wi-Max bugging devices
-Wireless videocameras 2.4 Ghz
Detection range is 30 feet
Technical Specs
Detection range is 30 feet
CDMA 824-849 MHz
GSM 880-920 MHz
GSM (DCS) 1710-1790 MHz
WCDMA, 3G, GSM (PCS), DECT 1920-2000 MHz
Bluetooth, Wi-Fi 2400-2480
Wi-Max 3000-7000 MHz
Antenna 2 Omni-directional antennas
Detection distance 1-10 meters
operation time 10-15 hours
power 2 AAA
Box Size 7 x 5 x 1.50
Unit Size 2.75 x 4.75 x .50
Weight 1.00
Detects CDMA, GSM, WCDMA/3G, 4G, Bluetooth/Wi-Fi, and Wi-Max
Frequency range
Includes:
Manual
Cleaning Cloth
2 Antennas
Screw driver
2 Batteries size AAA
Detector
Standard shipping is FREE for all retail orders totaling $100.00 or more! (48 Continental US orders only) Flat rate of $8.50 shipping applies to orders under $100.00
|
795.00 |
|
|
iProtect Multi-Channel Wireless Detector
The first of its kind, all-in-one detector that is easy to use for any TSCM level. Find GPS trackers, cell phone signals and other wireless protocols easily using this Multi-Channel Digital Detector. The 1217 will pick up with higher accuracy 2,3,4 and 5G mobile bands. Other detection devices become overloaded with signals from the base station rendering them practically unusable in large cities. The DD1217 is designed to avoid interference from base station.
Why do we need such high end hand held detection devices?
Searching for the illegal use of mobile / Cell signals is becoming an increasingly important task during counter surveillance sweeping. Numerous eavesdroppers transmit information via mobile/Cell networks. The mass production of components for developers such as GSM, 3G, 4G/LTE and 5G modules, enables them to develop cheap and quick surveillance methods which have ultra-high quality sound, video or location transmission. Hidden cameras camouflaged as household appliances, toys or interior objects will most likely transmit data via mobile networks or Wi-Fi. Spy listening devices quite often have a slot for SIM-cards to enable them to function on a cellular network. A GPS tracker is a device that is installed in a vehicle and transmits its location by sending coordinates via mobile communication.
The DD1217 is an unique hand held detection device:
The user is able to see exactly which signal has been detected displayed right on the unit. This greatly improves the ability to distinguish suspicious signals from external interferences and enables the user to perform a physical search for a certain transmitter. Such ability is not available for wide-band detectors that combine all the signals. The iProtect 1217 has a selective detector, can inspect one separate band, which is why it is irreplaceable during professional searches. One more important advantage of the iProtect 1217 is the TRACKER mode (searching for GPS trackers). In this mode, the device is adjusted for detecting only mobile signals and accumulates a history of located periodic sending of data with coordinates.
Able to detect mobile and wireless signals at a much greater distance compared to conventional RF detectors (at least 10 times more)
Selective: interference resistant and with a high sensitivity
Has worldwide coverage of mobile standards – can detect all existing bands of GSM, CDMA, 3G, 4G/LTE and 5G in the range up to 6 GHz
Able to detect all types of wireless signals, including Wi-Fi 2.4 GHz, Bluetooth, Wi-Fi 5 GHz, DECT, ISM 434MHz, ISM 968 MHz and ISM 915 MHz
Detection of at least 26 mobile and wireless bands
Can be adjusted to the frequency allocation of the country of use
A selective multi-band principle of work informs the user of exactly which signals were found
The mode of analysis of a certain band facilitates the physical search of a transmitter
A separate mode for the detection of GPS trackers with history accumulation (TRACKER)
ALARM function warns the operator about exceeding the threshold, both with sound and visually
43 threshold levels for setting optimal sensitivity
Can be set up for specific tasks, for example, for the detection of Wi-Fi only, etc.
Operation modes: ALL BANDS (detection on all bands); GROUP (detection on the selected group of bands); BAND (analysis of a separate band); TRACKER (detection of GPS trackers)
Two antenna inputs and two antennas in the set for ensuring maximum sensitivity
The high-band directional antenna facilitates locating of transmitters above 2400 MHz
The built-in rechargeable battery provides an operational time of up to 5 hours
Rechargeable via USB
Technical Specifications:
Number of Bands: 26 Power:
Built-in rechargeable battery 6800 mAh 3.7V
Power supply source: USB 5V
Operating and control elements: Joystick: move left-right, up-down, threshold adjustment, mode selection Button POWER OFF: switch off Button
US (bands of the USA) EU (European bands) Total (all bands)
Sound signals: Alarm, depression of buttons
Number of alarm threshold levels: 43
Alarm Function: Visual or Audio
Operations modes: ALL BANDS ( detects all bands), GROUP (detects on the selected group of bands), BAND (analysis of a separate band); TRACKER (detection of GPS tracker)
Average Sensitivity; -60 dBm
Antenna inputs: Input 1 SMA, 2400-6000MHz
Battery time up to 5 hours
Signal Dectection:
Wi-Fi
3G
4G
5G
GPS
CDMA
GSM
Bluetooth
Detection Range:
Up to 6 Ghz
Power Type:
Battery
Included:
DD1217 Detector
High-band antenna Micro-Pointer x 1
Low-band rod antenna x 1
Charging Cable USB Type C
Angle adapter SMA x 2
Hard case for transportation
Standard shipping is FREE for all retail orders totaling $100.00 or more! (48 Continental US orders only) Flat rate of $8.50 shipping applies to orders under $100.00.
|
3245.99 |
|
|
iProtect 3-Band RF Detector
One Device shows 3 different types of detection at once displayed in a bar graph. Registers VHF/UHF 50-700 MHz, Mobile and Wireless 700 MHz- 3 GHz and Microwave and Wireless 3-12 GHz.
Having all three on the screen visibly shows what type of signals are being detected. This device allows the operator to set an alarm to reject background noise to a certain threshold, so it will only detect from at above the frequency set.
FREQUENCY RANGE: 50 MHz to 12 GHz
Features:
Detects all types of RF transmissions including analog and digital, audio and video
Frequency range 50 MHz – 12 GHz
Separation into 3 bands helps to avoid loss of sensitivity near strong interference
ALL BANDS and ONE BAND display modes
High sensitivity to 3G and wireless protocols (Wi-Fi, Bluetooth, etc.)
Working modes: SILENT, AUDIO and ALARM
Adjustable alarm threshold
Portable, reliable and easy-to-use
The BARGRAPH shows the momentary RF level
The HISTOGRAM displays the RF signal over 5 seconds (in 'ONE BAND' display mode)
The SIGNATURE displays the possible signal type
Built-in directed microwave antenna
Shock-resistant CNC milled duralumin housing
Rechargeable Li-Ion battery with resource of 6 hours
Controlled by microcontrollers
2x built-in OLED displays
Specifications:
Frequency Range: 50 MHz – 12 GHz, Band 1: 50 – 700 MHz, Band 2: 700 MHz – 3 GHz, Band 3: 3GHz – 12 Ghz
Charging Port: USB
Battery Recharge Time: 4 hours
Battery Resource: 6 Hours
Battery: Recharable Li-Ion 1150mAh @ 3.7v
Threshold settings: 48 steps
Micorwave Antenna: Built-in (band 3)
RF Connector: SMA (band1 & 2), 50Ohm
Working Modes: Silent, Audio, Alarm
Display Modes: All Bands, One Band
Indicators: Main Display & Status Display
Operating Temp: 14-113°F
Included:
Detector
Rod Antenna
Mini-USB Charging Cable
Standard shipping is FREE for all retail orders totaling $100.00 or more! (48 Continental US orders only) Flat rate of $8.50 shipping applies to orders under $100.00.
|
795.00 |
|
|
iProtect Digital RF Detector
The iProtect 1206i is a new class of counter surveillance device. Unlike all typical searching devices it can detect modern 'hidden' bugs which use such protocols as Bluetooth and Wi-Fi at a long distance. Such bugs, especially Bluetooth types, are practically undetectable by common RF detectors due to their very low transmitted power and special type of modulation.
The i Protect DD1206 uses a separate channel with a high, (2.4/5 GНz) frequency pre-selector to detect and locate Bluetooth and Wi-Fi with a much higher sensitivity. The unit also then processes the demodulated signal in order to identify which protocol has been detected. In addition the unit can detect all 'classical' bugs and inspect them for the presence of correlation by sending sound impulses as well as other digital transmissions at a standard distance (GSM, 3G, DECT, etc.)
The DD1206 is a sophisticated handheld radio frequency detection device that incorporates the ability to detect nearly any type of wireless protocol including digital frequencies such as Wi-Fi and analog frequencies reaching up to 12Ghz in range. Making this detection device extremely successful at finding unwanted surveillance threats are the two different antennas users can deploy and the demodulation feature which enables the users to hear the sound signature of the frequency.
The perfect tool in searching for digital and analogue transmitters in the frequency ranges. Now up to 12GHz
Features:
Main antenna 50MHz – 12GHz Wider coverage, particularly at lower frequencies, has made it possible to increase the detection distance of a conventional VHF/UHF bug by 2-3 times, while saving perfect sensitivity at the
Anntena 2 1.4-2.48 GHz and 4.9-5.875 GHz This is the first time when an affordable RF detector gets the microwave log-periodic directed antenna supplied in the standard set. 2-4 times longer distance to all sources above 2GHz (Wi-Fi 2.4GHz, Wi-Fi 5GHz, Bluetooth, Wi-Max, LTE High, etc.). The directionality provides easy pinpointing of a wireless source. Now you not only know that there is a Wi-Fi source, but can quickly pinpoint it.
Increased sensitivity to Bluetooth/Wi-Fi signals allows the operator to detect wireless sources at distance of 50 cm- 2 m
Detects GSM, LTE, Wi-Max Bluetooth, Wi-Fi 2.4GHz an Wi-Fi 5GHz and RF and wireless video cameras
16-segment bar graph indicator providing a wide dynamic range
3 modes: sound, vibration and mixed
2 levels of sensitivity (attenuator)
Durable metallic body
Microprocessor controlled
Correlation function discovers FM-transmitters by the presence of sound is different than other detectors this unit can produce a loop-back effect A microphone transmitter will pick up the sound and transmit the beep. The demodulation display will pick up the transmission and flash simultaneously. Also, when the unit detects other transmission different sounds will come from the unit depending the type of transmission it detects.
1 year warranty
Specifications:
Detects Bluetooth, Wi-Fi, DECT, GSM, and RF
Operation up to 20 hours
Power 2xAAA
Frequency range, Antenna #1: 50MHz – 12Ghz.
Indications: Active antenna, Low battery, Mode, Identification, Attenuator, Secondary demodulation
Antenna 2, GHz: 2.4 - 2.48
/4.9 - 5.875
Download Manual
Includes:
Detector
Manual
Cleaning Cloth
2 Antennas
Screw driver
2 Batteries size AAA
Standard shipping is FREE for all retail orders totaling $100.00 or more! (48 Continental US orders only) Flat rate of $8.50 shipping applies to orders under $100.00
|
495.00 |
|
|
Stun Master Multi-Functional Rechargeable Stun Gun
9.5 Million volts of kick butt stopping power. This puppy will stop someone dead in their tracks and put them on the ground. No other stun gun has this kind of knock down power.
Stun Master Multi-Function rechargeable stun gun features:
9.5 million volts
Super bright LED flashlight
Red flashing emergency lights
Alarm - 130dB
Disable pin wrist strap
Rubberized grip
4.75” x 2.5” x 1”
Holster included
9.5 Million Volts with 4.6 million milliamps is a lot of POWER! More than any other multi-functional stun gun available today.
Between the two shocking probes, there is an LED Flashlight. Unlike other flashlights which just use a small LED on the surface or a group of LED bulbs, a reflecting cup and LED bub is used in our light.
This combination creates a super bright flashlight for use in the dark.
There are two red flashing warning lights on both sides of the stun gun. When these lights are turned on, it will flash brightly and rapidly. Use to attract attention, especially at night. Can be useful during an attack or other emergency situations such as car trouble.
Sirens are readily recognized as an emergency call for help. Use the 130dB alarm to draw attention to yourself in the event you are attacked or in a situation where you feel your life is threatened.
Never needs batteries because it's rechargeable. Battery charger included. These batteries have been tested and proven to deliver maximum power for 800 to 1000 recharges.
Stun Devices can not be shipped to Hawaii, Massachusetts, Rhode Island, or Wisconsin
Standard shipping is FREE for all retail orders totaling $100.00 or more! (48 Continental US orders only) Flat rate of $8.50 shipping applies to orders under $100.00.
|
29.95 |
|
|
Stun Master Multi-Function Stun Gun
2.7 Million Volts!
2.7 Million volts of kick butt stopping power. This puppy will stop someone dead in their tracks and put them on the ground. No other stun gun has this kind of knock down power.
Stun Master Multi-Function rechargeable stun gun features:
2.7 million volts
Super bright LED flashlight
Red flashing emergency lights
Alarm - 110dB
Disable pin wrist strap
4.75” x 2.5” x 1”
Holster included
2.7 Million Volts is a lot of POWER! More than any other stun gun available today.
Stun Master Multi-Function rechargeable stun gun features:
2.7 million volts
Super bright LED flashlight
Red flashing emergency lights
Alarm - 110dB
Disable pin wrist strap
4.75” x 2.5” x 1”
Holster included
2.7 Million Volts is a lot of POWER! More than any other stun gun available today.
Between the two shocking probes, there is an LED Flashlight. Unlike other flashlights which just use a small LED on the surface or a group of LED bulbs, a reflecting cup and LED bub is used in our light. This combination creates a super bright flashlight for use in the dark.
There are two red flashing warning lights on both sides of the stun gun. When these lights are turned on, it will flash brightly and rapidly. Use to attract attention, especially at night. Can be useful during an attack or other emergency situations such as car trouble.
Sirens are readily recognized as an emergency call for help. Use the 110dB alarm to draw attention to yourself in the event you are attacked or in a situation where you feel your life is threatened.
Never needs batteries because it's rechargeable. Battery charger included. These batteries have been tested and proven to deliver maximum power for 800 to 1000 recharges.
Stun Devices can not be shipped to Hawaii, Massachusetts, Rhode Island, or Wisconsin
Standard shipping is FREE for all retail orders totaling $100.00 or more! (48 Continental US orders only) Flat rate of $8.50 shipping applies to orders under $100.00.
|
49.95 |
|
|
Ultimate Protection TSCM Kit
Protect from eavesdropping using four of our NG3000 Rabblers plus search for hidden cameras with this kit. Rapidly deploy all the items in DD2030 anywhere you feel threatened by eavesdroppers or hidden cameras. The Rabbler creates an additional barrier of noise interference making it possible to mask your conversation when confidentiality is necessary. The Pro Camera Finder DD1200 quickly identifies and locates a camera by using an array of ultra-bright LED's. Use the DD1216 to scan for RF signals up to 12G.
Ultimate Protection TSCM Kit gives you 4 Rabblers (NG3000) to strategically place in the area you think is a threat to eavesdropping devices. This kit includes two must have for any TSCM kit a handheld high range Tri band 12G scanner the DD1216 and the bonus of this kit is the DD1300 you can look for hidden cameras that are not transmitting to help secure the area of unwanted video surveillance. Comes in a heavy duty carry case for portability and ease of use.
Kinds of listening devices rendered useless by the NG3000 “Rabbler”
Voice recorders
Radio microphones
GSM/4G “bugs”
Body-carried video cameras - watches, ties, etc. (Audio only not video)
Wired microphones
Any other type of audio surveillance
NG3000 Features:
* Designed by TSCM counter surveillance professionals and will protect you against all types of eavesdropping devices.
* Employs a new approach to the problem of conversation protection.
* Uses a speech-like noise which, in the most of cases, has proven to be more efficient when compared to white noise.
* The noise has been 'compiled' using real human conversations and is similar to the noise of in busy public places. This type of noise is the most effective when creating interference to voice recorders and listening devices, especially when the size of the protective device is critical.
* Is a portable sized device which can easily be transported in a pocket or a small bag.
* Has been specifically designed for situations when the safety of conversations is extremely important on the one hand, and on the other hand the protective device should be as small as possible to allow easy transportation while not giving away your intentions.
* As the Rabbler is always nearby, it can easily be taken out and used anytime with the slightest chance of any information leakage.
* 4x the protection with 4 iProtect NG3000 Rabblers
DD1200 Features:
* Detection of all types of hidden video cameras not depending on their working state
* R filter for rejection of natural reflections
* Adjustable brightness with bargraph
* Powered by 2 AAA batteries
* Low battery indicator
* Durable metal case
* Detection distance up to 60 Feet
DD1216 Features:
* Detects all types of RF transmissions including analog and digital, audio and video
* Frequency range 50 MHz – 12 GHz
* Separation into 3 bands helps to avoid loss of sensitivity near strong interference
* ALL BANDS and ONE BAND display modes
* High sensitivity to 3G and wireless protocols (Wi-Fi, Bluetooth, etc.)
* Working modes: SILENT, AUDIO and ALARM
* Adjustable alarm threshold
Portable, reliable and easy-to-use
* The BARGRAPH shows the momentary RF level
* The HISTOGRAM displays the RF signal over 5 seconds (in 'ONE BAND' display mode)
* The SIGNATURE displays the possible signal type
* Built-in directed microwave antenna
* Shock-resistant CNC milled duralumin housing
* Rechargeable Li-Ion battery with resource of 6 hours
* Controlled by microcontrollers
* 2x built-in OLED displays
Specifications:
Weight .85
Unit Size 2 x 3.25 x .75
Box Size 7.00 x 5 x 1.50
Indicators: Power, Volume, Level
Controls: Power and Volume
Power 9V
Frequency Range 300 Hz-3600 Hz
Dimensions: 3.375” L x 2.125” W x 0.625” H
Weight: 0lb 14oz
Included:
Manual
Leather Case
1 9V Battery
Waterproof Carrying Case
1 x DD1216
1 x DD1200
4x NG3000
Standard shipping is FREE for all retail orders totaling $100.00 or more! (48 Continental US orders only) Flat rate of $8.50 shipping applies to orders under $100.00.
|
2950.00 |
|
|
Ultimate Protection TSCM Kit
Protect from eavesdropping using four of our NG3000 Rabblers plus search for hidden cameras with this kit. Rapidly deploy all the items in DD2030 anywhere you feel threatened by eavesdroppers or hidden cameras. The Rabbler creates an additional barrier of noise interference making it possible to mask your conversation when confidentiality is necessary. The Pro Camera Finder DD1200 quickly identifies and locates a camera by using an array of ultra-bright LED's. Use the DD1216 to scan for RF signals up to 12G.
Ultimate Protection TSCM Kit gives you 4 Rabblers (NG3000) to strategically place in the area you think is a threat to eavesdropping devices. This kit includes two must have for any TSCM kit a handheld high range Tri band 12G scanner the DD1216 and the bonus of this kit is the DD1300 you can look for hidden cameras that are not transmitting to help secure the area of unwanted video surveillance. Comes in a heavy duty carry case for portability and ease of use.
Kinds of listening devices rendered useless by the NG3000 “Rabbler”
Voice recorders
Radio microphones
GSM/4G “bugs”
Body-carried video cameras - watches, ties, etc. (Audio only not video)
Wired microphones
Any other type of audio surveillance
NG3000 Features:
* Designed by TSCM counter surveillance professionals and will protect you against all types of eavesdropping devices.
* Employs a new approach to the problem of conversation protection.
* Uses a speech-like noise which, in the most of cases, has proven to be more efficient when compared to white noise.
* The noise has been 'compiled' using real human conversations and is similar to the noise of in busy public places. This type of noise is the most effective when creating interference to voice recorders and listening devices, especially when the size of the protective device is critical.
* Is a portable sized device which can easily be transported in a pocket or a small bag.
* Has been specifically designed for situations when the safety of conversations is extremely important on the one hand, and on the other hand the protective device should be as small as possible to allow easy transportation while not giving away your intentions.
* As the Rabbler is always nearby, it can easily be taken out and used anytime with the slightest chance of any information leakage.
* 4x the protection with 4 iProtect NG3000 Rabblers
DD1200 Features:
* Detection of all types of hidden video cameras not depending on their working state
* R filter for rejection of natural reflections
* Adjustable brightness with bargraph
* Powered by 2 AAA batteries
* Low battery indicator
* Durable metal case
* Detection distance up to 60 Feet
DD1216 Features:
* Detects all types of RF transmissions including analog and digital, audio and video
* Frequency range 50 MHz – 12 GHz
* Separation into 3 bands helps to avoid loss of sensitivity near strong interference
* ALL BANDS and ONE BAND display modes
* High sensitivity to 3G and wireless protocols (Wi-Fi, Bluetooth, etc.)
* Working modes: SILENT, AUDIO and ALARM
* Adjustable alarm threshold
Portable, reliable and easy-to-use
* The BARGRAPH shows the momentary RF level
* The HISTOGRAM displays the RF signal over 5 seconds (in 'ONE BAND' display mode)
* The SIGNATURE displays the possible signal type
* Built-in directed microwave antenna
* Shock-resistant CNC milled duralumin housing
* Rechargeable Li-Ion battery with resource of 6 hours
* Controlled by microcontrollers
* 2x built-in OLED displays
Specifications:
Weight .85
Unit Size 2 x 3.25 x .75
Box Size 7.00 x 5 x 1.50
Indicators: Power, Volume, Level
Controls: Power and Volume
Power 9V
Frequency Range 300 Hz-3600 Hz
Dimensions: 3.375” L x 2.125” W x 0.625” H
Weight: 0lb 14oz
Included:
Manual
Leather Case
1 9V Battery
Waterproof Carrying Case
1 x DD1216
1 x DD1200
4x NG3000
Standard shipping is FREE for all retail orders totaling $100.00 or more! (48 Continental US orders only) Flat rate of $8.50 shipping applies to orders under $100.00.
|
2950.00 |
|
|
Multifunctional Portable Bug Sweep Unit
When you need a detection device that can do it all, the DD801 Law-Grade Pro should be your first choice. Equipped with 5 different detection features and detects up to 10GHz. The DD801 can help deter even the most hard-to-find surveillance threat.
Specifications:
Radio Frequency Response 10MHz ~ 10GHz
Telesecurity - Audio Frequency Range: 250Hz ~ 5KHz
Detects:
Wireless tapping even with VOX
Hidden cameras, Hardwired and Wireless
Wire telephone tapping even on cable
Computer and Fax transmitters
Series and Parallel transmitters
Transmitting GPS trackers (only when GPS device is transmitting signal location)
Devices on internet phone and IP phone
Laser Tapping
Prevents:
Wire telephone tapping
Laser tapping
Recordings of a voice recorder, tape, digital and parabolic reflector using white noise generator
Detects:
Detects all concealed transmitting bugs up to 10GHz.
Locates all hidden cameras powered or not.
Locates all GPS tracking beacons while active.
Instant confirmation of transmitting sources within range
All 3G/4G cellular phones: GSM 850/ 900E/1800/1900, UMTS 850/900/1800/1900/2100 (3G), CDMA 450 (A-H)/800/1900 standards. LTE, GSM, GPRS, GPS, WCDMA, UMTS, TDSCDMA
All active cordless DECT phones
All active Bluetooth and Wi-Fi devices
All wired & wireless video cameras
All active radio transmitters with analog modulation (AM, FM, PM)
All active radio transmitters with digital modulation and continuous carrier (FSK, PSK, etc.)
Includes:
Detection Device Unit
Lens finder attachment
Ac adapter
Carry strap
2 telephone cables
Earphone
Telephone connector
Quick start guide and instruction
*This item cannot be returned
Standard shipping is FREE for all retail orders totaling $100.00 or more! (48 Continental US orders only) Flat rate of $8.50 shipping applies to orders under $100.00.
|
495.00 |
|
|
deScammer Credit Card Skimmer Detector
deScammer the One Touch Credit Card Skimmer detection device. Helps to find credit card skimmers at Gas Stations, ATM or point of purchase.
Fight Back with One Touch Credit Skimmer Detection from deScammer™
46% of Americans have been victim of credit card fraud in the past 5 years. With the growing concern of credit card fraud the deScammer is an easy tool to protect people from credit card skimmer. This easy to use device is simple and reliable.
How Does the DeScammer Work?
Credit card skimmers use bluetooth technology to swipe your card's information and send it to a thief waiting nearby. In just a few hours the thief can swipe hundreds of credit card data. The deScammer works by detecting a bluetooth network near a credit card point of sale and alerting you with a red light. Simply aim the deScammer fob at the place where you insert your card, press the button and wait for a solid red light warning or a green light, indicating you're safe to swipe.
Features:
Rechargeable Battery
Simple to use just press the button and wait for the solid red or green light
Battery last up to 2 hours of continuous use which equates to months of actual use
Picks up known illicit Bluetooth transmissions
Specifications:
Rechargeable Battery
2 hours continuous use battery life
Finds known illicit bluetooth transmission
Includeded:
USB Charging Cable
Disclaimer the deScammer is designed as an aid to help find credit card skimmers. It is picking up Bluetooth transmission, some credit card skimmers do not use Bluetooth. It is the user responsibility to ensure proper use and be aware of the limit of this device. The Covert Eye, deScammer and all agents are not responsible if credit card fraud occurs after use of the deScammer device.
Standard shipping is FREE for all retail orders totaling $100.00 or more! (48 Continental US orders only) Flat rate of $8.50 shipping applies to orders under $100.00
|
129.00 |
|