|
iProtect Digital RF Detector
The iProtect 1206i is a new class of counter surveillance device. Unlike all typical searching devices it can detect modern 'hidden' bugs which use such protocols as Bluetooth and Wi-Fi at a long distance. Such bugs, especially Bluetooth types, are practically undetectable by common RF detectors due to their very low transmitted power and special type of modulation.
The i Protect DD1206 uses a separate channel with a high, (2.4/5 GНz) frequency pre-selector to detect and locate Bluetooth and Wi-Fi with a much higher sensitivity. The unit also then processes the demodulated signal in order to identify which protocol has been detected. In addition the unit can detect all 'classical' bugs and inspect them for the presence of correlation by sending sound impulses as well as other digital transmissions at a standard distance (GSM, 3G, DECT, etc.)
The DD1206 is a sophisticated handheld radio frequency detection device that incorporates the ability to detect nearly any type of wireless protocol including digital frequencies such as Wi-Fi and analog frequencies reaching up to 12Ghz in range. Making this detection device extremely successful at finding unwanted surveillance threats are the two different antennas users can deploy and the demodulation feature which enables the users to hear the sound signature of the frequency.
The perfect tool in searching for digital and analogue transmitters in the frequency ranges. Now up to 12GHz
Features:
Main antenna 50MHz – 12GHz Wider coverage, particularly at lower frequencies, has made it possible to increase the detection distance of a conventional VHF/UHF bug by 2-3 times, while saving perfect sensitivity at the
Anntena 2 1.4-2.48 GHz and 4.9-5.875 GHz This is the first time when an affordable RF detector gets the microwave log-periodic directed antenna supplied in the standard set. 2-4 times longer distance to all sources above 2GHz (Wi-Fi 2.4GHz, Wi-Fi 5GHz, Bluetooth, Wi-Max, LTE High, etc.). The directionality provides easy pinpointing of a wireless source. Now you not only know that there is a Wi-Fi source, but can quickly pinpoint it.
Increased sensitivity to Bluetooth/Wi-Fi signals allows the operator to detect wireless sources at distance of 50 cm- 2 m
Detects GSM, LTE, Wi-Max Bluetooth, Wi-Fi 2.4GHz an Wi-Fi 5GHz and RF and wireless video cameras
16-segment bar graph indicator providing a wide dynamic range
3 modes: sound, vibration and mixed
2 levels of sensitivity (attenuator)
Durable metallic body
Microprocessor controlled
Correlation function discovers FM-transmitters by the presence of sound is different than other detectors this unit can produce a loop-back effect A microphone transmitter will pick up the sound and transmit the beep. The demodulation display will pick up the transmission and flash simultaneously. Also, when the unit detects other transmission different sounds will come from the unit depending the type of transmission it detects.
1 year warranty
Specifications:
Detects Bluetooth, Wi-Fi, DECT, GSM, and RF
Operation up to 20 hours
Power 2xAAA
Frequency range, Antenna #1: 50MHz – 12Ghz.
Indications: Active antenna, Low battery, Mode, Identification, Attenuator, Secondary demodulation
Antenna 2, GHz: 2.4 - 2.48
/4.9 - 5.875
Download Manual
Includes:
Detector
Manual
Cleaning Cloth
2 Antennas
Screw driver
2 Batteries size AAA
Standard shipping is FREE for all retail orders totaling $100.00 or more! (48 Continental US orders only) Flat rate of $8.50 shipping applies to orders under $100.00
|
495.00 |
|
|
Camera Finder with RF Detector
When you need to find a hidden camera this little detection device can find it two ways, 1- using the powerful set of red LED’S and view finder to locate the lens of any camera 2- using RF detector to pick up transmission of Radio frequency.
Need to find a hidden Camera, this little spyfinder type device will do the job
Features:
Detects RF signals up to 30ft
Locate a camera lens from 3 inches- 30ft
Easy to read backlit LCD display with battery, signal strength, and alert mode indicators
Flashing LED lights and view finder for detecting a variety of camera lenses, both overt and covert
Detection of hidden wireless systems, such as listening devices or camera systems
Detection frequency range of 1MHz-6.5GHz
Easy alerts using Visual and Audible or Vibrating
Wireless signal strength indicator and adjustable detection sensitivity for narrowing in on signal source
Built-in rechargeable lithium battery allowing up to five hours of continuous use between charges
Retractable telescoping antenna
Compact and very convenient to transport, easily fits into pockets
90 days Warranty
Specifications:
Detection Frequency Range: 1MHz-6.5GHz
Antenna Length: 23mm collapsed, 90mm extended
Battery: Built-in 3.7V 500mA
Current Consumption: 100mA
Charging Voltage: 5-6VDC
Includes:
Detector/Camera Lens Finder
Charger
Manual
Standard shipping is FREE for all retail orders totaling $100.00 or more! (48 Continental US orders only) Flat rate of $8.50 shipping applies to orders under $100.00
|
89.95 |
|
|
Lawmate Wireless and Wired Camera and RF Detector
Are you worried about privacy in your home, office, bedroom, or bathroom? You've seen the hidden cameras and wireless taps on our site, now make sure they aren't tracking you.
Check your home or office for hidden cameras and wireless devices. Wireless transmitters vary in signal strength. Some are designed to transmit as far as three miles away while others can only be received one room away. In this case, the detector will need to be extra sensitive, and the user will need to be nearly on top of the device. However, if the detector is too sensitive it will give false alarms and waste the time of the user.
Simple sensitivity adjustment. This easy to use device has two sensitivities: high and low. Use high for general sweeps and use low to hone in on any suspect areas. No more guessing background levels with trial and error.
Covert and easy to use. Starts scanning instantly when you turn it on. You can easily adjust the sensitivity, vibration, and lens detector LEDs. Operate in complete secrecy by using it's silent vibrating mode in your pocket. It is a bit smaller than the adult human hand and sports a telescoping antenna, so you can store it away discretely on your person until you need it.
A pair of AAA batteries in the box means you can start searching right away!
Features
Telescoping antenna
10 LED Bar line detection display
High and low sensitivity
Vibration mode
Bright lens detector
Technical Specs
Detection range: 20MHz-6.0GHz
Power supply: 2x AAA
Weight: Approx. 0.2 lb
Dimensions: 3.5" x .75" x 2"
Includes
1 x CDLM10 Camera Detector
2 x AAA
1 x Instruction Booklet
Standard shipping is FREE for all retail orders totaling $100.00 or more! (48 Continental US orders only) Flat rate of $8.50 shipping applies to orders under $100.00
|
149.00 |
|
|
Detection and Counter Surveillance Kit
Feel safe, secure and protect your environment and information from outside threats. We've created a detection and counter surveillance kit that will aid and identify surveillance threats of any kind.
No job is too small or too big with this detection kit on hand. Comes standard and nicely organized in tactical case including the iProtect DD1216, DD1207, DD1206, DD1200 and DD12051. Mission ready, this case makes it easy to keep track and transport your detection devices regardless of the job or if you don't need the whole kit you can take whatever you need with you on-the-go. All devices are small and portable in size.
FREQUENCY RANGE: 50MHz-12GHz
Includes:
DD1216: iProtect 3-Band RF Detector [50MHz-12GHz]
DD1207: iProtect Wireless Detector [824MHz-7000MHz]
DD1206: iProtect Digital RF Detector [50MHz-12GHz]
DD1200: iProtect Camera Finder [Finds Non Transmitting Cameras]
DD12051: iProtect RF Wireless Signal Wand [50MHz-8GHz]
The Bug, Camera & GPS Detectors included help assist in sweeping and locating modern (digital) and classic (analog) forms of surveillance devices. Locate hidden cameras, listening devices or GPS trackers that could be invaiding your private space at home, the office or vehicle.
Secure your home, office and vehicles. Each device has specialized features, adjustable settings, threat level indicators to help uncover and find unwanted surveillance devices. Each one designed to search covertly, LED, Sound or Graph Indicators will help you narrow down the search and type of devices to look out for based upon what's registering. Be sure to turn off all authorized devices in the environment to not impead the investigation. All electronics emit a frequency, these anti-surveillance devices will measure and monitor those in range giving off a RF signature of 50MHz-12GHz.
Stronger the singal, closer the device. Detection devices pick up the RF frequencies given off by Cellular, Bluetooth and WiFi spy gadgets that could be hidden in your everyday items. [GSM, 2G, 3G, LTE, Bluetooth, 2.4GHz & 5GHz WiFi and Wi-Max]
Standard shipping is FREE for all retail orders totaling $100.00 or more! (48 Continental US orders only) Flat rate of $8.50 shipping applies to orders under $100.00.
|
2989.00 |
|
|
iProtect 3-Band RF Detector
One Device shows 3 different types of detection at once displayed in a bar graph. Registers VHF/UHF 50-700 MHz, Mobile and Wireless 700 MHz- 3 GHz and Microwave and Wireless 3-12 GHz.
Having all three on the screen visibly shows what type of signals are being detected. This device allows the operator to set an alarm to reject background noise to a certain threshold, so it will only detect from at above the frequency set.
FREQUENCY RANGE: 50 MHz to 12 GHz
Features:
Detects all types of RF transmissions including analog and digital, audio and video
Frequency range 50 MHz – 12 GHz
Separation into 3 bands helps to avoid loss of sensitivity near strong interference
ALL BANDS and ONE BAND display modes
High sensitivity to 3G and wireless protocols (Wi-Fi, Bluetooth, etc.)
Working modes: SILENT, AUDIO and ALARM
Adjustable alarm threshold
Portable, reliable and easy-to-use
The BARGRAPH shows the momentary RF level
The HISTOGRAM displays the RF signal over 5 seconds (in 'ONE BAND' display mode)
The SIGNATURE displays the possible signal type
Built-in directed microwave antenna
Shock-resistant CNC milled duralumin housing
Rechargeable Li-Ion battery with resource of 6 hours
Controlled by microcontrollers
2x built-in OLED displays
Specifications:
Frequency Range: 50 MHz – 12 GHz, Band 1: 50 – 700 MHz, Band 2: 700 MHz – 3 GHz, Band 3: 3GHz – 12 Ghz
Charging Port: USB
Battery Recharge Time: 4 hours
Battery Resource: 6 Hours
Battery: Recharable Li-Ion 1150mAh @ 3.7v
Threshold settings: 48 steps
Micorwave Antenna: Built-in (band 3)
RF Connector: SMA (band1 & 2), 50Ohm
Working Modes: Silent, Audio, Alarm
Display Modes: All Bands, One Band
Indicators: Main Display & Status Display
Operating Temp: 14-113°F
Included:
Detector
Rod Antenna
Mini-USB Charging Cable
Standard shipping is FREE for all retail orders totaling $100.00 or more! (48 Continental US orders only) Flat rate of $8.50 shipping applies to orders under $100.00.
|
795.00 |
|
|
Maxi-Tech Personal 10GhZ RF Detector
Are you worried about privacy in your home, office, bedroom, or bathroom? You've seen the hidden cameras and wireless taps on the internet, but you want to ensure they aren't tracking you.
Check your home or office for hidden cameras, GSM, WIFI, IP, and wireless devices.
Features:
Covert and Easy to Use - This device begins instantly scanning when you turn it on.
Multi-Purpose Scanning - This unit will detect 3G/4G/GSM, WIFI, and IP cameras.
LED Alerts
RF Detection Up to 10GHz
Attachable Lens Finder
Technical Specs:
Detecting Range: 10MHz to 10GHz
Power: 1x 580mAh 9V Alkaline Battery
Battery Life: 10+ Hours
Size (L x W x H): 2.2" x 1.1" x 3.5"
Weight: 0.2 lb (without batteries)
Included
1 x SA-DD802
1 x 9V Battery
1 x Attachable Lens Finder
|
195.00 |
|
|
Law Grade Defender Simple 10GHz RF Detector and Camera Lens finder
When you need a detection device that offers simple operation matched with quality performance, the DD802 Defender is the perfect choice. Equipped with both RF detection and a camera lens finder, this handheld device is capable of finding transmitting and non-transmitting video surveillance devices.
Detects, Locates & Prevents All Eavesdropping Bugs and Cameras Including:
Wired and Wireless Cameras
Wireless Mics
Audio Transmitter Bugs
Video Transmitter Transmitters
GPS tracking (only when device is transmitting signal)
All Wireless / Transmitter Bugs
Radio Frequency Response 10MHz ~ 10GHz
GPS Vehicle Tracking Devices
All Types of Concealed Transmitters
Hidden Video Cameras (Spy-Cams)
Computer and FAX Eavesdropping Transmitters
"Series" and "Parallel" Telephone Transmitters
Bumper Beepers; , Body Worn Transmitters
ALL TYPES OF "INFINITY" DEVICES
Specifications:
Radio Frequency Response 10MHz ~ 8GHz
Battery 9Vol
Included:
Detection device unit
Antenna
Lens finder attachment
9V Battery
Quick start guide and instructions
Standard shipping is FREE for all retail orders totaling $100.00 or more! (48 Continental US orders only) Flat rate of $8.50 shipping applies to orders under $100.00.
|
195.00 |
|
|
Andre Basic Electronic Bug Detector
The ANDRE is a handheld broadband receiver that detects known, unknown, illegal, disruptive, or interfering transmissions. The ANDRE locates nearby RF, infrared, visible light, carrier current, and other types of transmitters. Access to eavesdropping and electronic bugging devices is becoming easier and more affordable. Quickly and discretely mitigate these threats using a wide range of accessories included in the ANDRE Basic Kit that are specifically designed to receive transmissions across a 1 kHz to 6 GHz frequency range.
Technical security specialists will appreciate the portability and responsiveness of the ANDRE
The Andre Basic come with 4 probes see the Andre Advance for complete kit
HISTOGRAM DISPLAY
The ANDRE features a signal strength histogram displaying RF levels over user-selected time intervals ranging from 5 seconds to 12 hours. Observe differences between (a) digital, (b) analog, and (c) burst signals and set alert thresholds.
SIGNAL INFORMATION AND BAND DETAILS
The ANDRE frequency counter automatically generates a signal list from the strongest signals. Signal frequencies are listed beginning with the strongest signal and can be designated as threatening, friendly, or unknown. Doubletapping a signal provides more details including band classification information.
AUDIO MODE
The ANDRE can demodulate and playback live analog audio. Ten second audio files can be recorded, stored, and played back. The live audio screen displays a bar graph showing received signal strength.
POST-INVESTIGATION RESOURCES
Gather data throughout an investigation for further analysis following a sweep. Review time chart screenshots, playback demodulated audio, and download captured signal lists on any PC while writing your report
APPLICATIONS
Emissions detection of WiFi, bluetooth, cell phones, illicit transmitters, etc. Interference detection and troubleshooting Contraband detection in correctional facilities, RF research and development, Wireless industry developers, Hobbyists and RF enthusiasts, Educational institutions, Corporate security surveys for illegal, unauthorized, or threatening transmitters, Measuring or detecting acoustic leakage or ultrasonic mechanical vibrations.
Specifications:
RF DETECTOR: Sensitivity: -75 dBm for 3 GHz frequency -85 dBm for probes providing frequency at 500 MHz Stepped attenuation control: 30 dB, 20 dB, 10 dB, Auto, off
AUDIO: Built-in speaker and external headphones with adjustable volume control
DISPLAY 3.5” (4 cm) capacitive touch screen
INPUT/OUTPUT:USB data port for software upgrades and file transfer
POWER Input: USB internal charger Batteries: 3400 mAh lithium-ion rechargeable battery (2 included), USB recharger Run time: >5 hours (typical)
Included:
Whip Antenna* 30 MHz - 6 GHz
VLF Loop* 10 kHz - 30 MHz
Carrier Current Probe* 100 kHz - 60 MHz
Infrared/Visible Light Probe (built-in)* 1 kHz - 70 MHz
Standard shipping is FREE for all retail orders totaling $100.00 or more! (48 Continental US orders only) Flat rate of $8.50 shipping applies to orders under $100.00.
|
3495.00 |
|
|
RF Detection and Lens Finder Kit
Never be without all the tools you need to aid in the ever growing concern for privacy. Whether you are a TSCM specialist, corporate executive or a concerned traveler. This kit can help you maintain the privacy you or your client expect. Out fitted with our very popular DD804 Pro-G10 Cell phone, GPS and RF detector, DD1215 wand high gain detector and the SF-103P Spyfinder Pro the easiest tool for finding non-transmitting hidden Cameras.
Includes
DD804: Radio Frequency from 10MHz ~ 10GHz, finds Cellphones GSM-CDMAand WCDMA
DD1215: iProtect High Frequencies detector form 4-GHZ to 13-GHZ
SP-103P: SpyFinder Pro hidden camera lens finder, no transmisson signal requried
Help clients or indivduals protect homes, offices, server rooms, hotel rooms or vehicles. The bug, camera & GPS detectors included in this kit can help assist in finding Analog or digital surveillance devices.
Never again travel without protection from hidden cameras or GPS tracking. Each device has its own specialized purpose to help locate unwanted surveillance devices.
Perfect kit for TSCM or government investigator as a add on for their investigations arsenal.
Standard shipping is FREE for all retail orders totaling $100.00 or more! (48 Continental US orders only) Flat rate of $8.50 shipping applies to orders under $100.00.
|
869.00 |
|
|
Andre Advanced Electronic Bugging Detector
The ANDRE is a handheld broadband receiver that detects known, unknown, illegal, disruptive, or interfering transmissions. The ANDRE locates nearby RF, infrared, visible light, carrier current, and other types of transmitters. Access to eavesdropping and electronic bugging devices is becoming easier and more affordable. Quickly and discretely mitigate these threats using a wide range of accessories included in the ANDRE Advanced Kit that are specifically designed to receive transmissions across a 1 kHz to 6 GHz frequency range.
Technical security specialists will appreciate the portability and responsiveness of the ANDRE
HISTOGRAM DISPLAY
The ANDRE features a signal strength histogram displaying RF levels over user-selected time intervals ranging from 5 seconds to 12 hours. Observe differences between (a) digital, (b) analog, and (c) burst signals and set alert thresholds.
SIGNAL INFORMATION AND BAND DETAILS
The ANDRE frequency counter automatically generates a signal list from the strongest signals. Signal frequencies are listed beginning with the strongest signal and can be designated as threatening, friendly, or unknown. Doubletapping a signal provides more details including band classification information.
AUDIO MODE
The ANDRE can demodulate and playback live analog audio. Ten second audio files can be recorded, stored, and played back. The live audio screen displays a bar graph showing received signal strength.
POST-INVESTIGATION RESOURCES
Gather data throughout an investigation for further analysis following a sweep. Review time chart screenshots, playback demodulated audio, and download captured signal lists on any PC while writing your report
APPLICATIONS
Emissions detection of WiFi, bluetooth, cell phones, illicit transmitters, etc. Interference detection and troubleshooting Contraband detection in correctional facilities, RF research and development, Wireless industry developers, Hobbyists and RF enthusiasts, Educational institutions, Corporate security surveys for illegal, unauthorized, or threatening transmitters, Measuring or detecting acoustic leakage or ultrasonic mechanical vibrations.
Specifications:
RF DETECTOR: Sensitivity: -75 dBm for 3 GHz frequency -85 dBm for probes providing frequency at 500 MHz Stepped attenuation control: 30dB, 20dB, 10dB, Auto, off
AUDIO: Built-in speaker and external headphones with adjustable volume control
DISPLAY 3.5” (4 cm) capacitive touch screen
INPUT/OUTPUT:USB data port for software upgrades and file transfer
POWER Input: USB internal charger Batteries: 3400 mAh lithium-ion rechargeable battery (2 included), USB recharger Run time: >5 hours (typical)
Included:
Whip Antenna* 30 MHz - 6 GHz
VLF Loop* 10 kHz - 30 MHz
Locator Probe 20 MHz - 6 GHz
Concealed Antenna 750 MHz - 6 GHz
Acoustic Leakage Detector 300 Hz - 20 kHz
Audio Transformer 300 Hz - 20 kHz
Carrier Current Probe* 100 kHz - 60 MHz
Log Periodic Antenna 500 MHz - 6 GHz
Infrared/Visible Light Probe (built-in)* 1 kHz - 70 MHz
Standard shipping is FREE for all retail orders totaling $100.00 or more! (48 Continental US orders only) Flat rate of $8.50 shipping applies to orders under $100.00.
|
4295.00 |
|