|
M1-PRO Near Field Receiver Detection Kit
M1-PRO Analogue and Digital Bug Detector from 0 KHz - 20 Ghz TSCM Multifunction Kit detector is a light weight, high-tech multi-functional handheld detection device designed for TSCM professionals. M1-PRO is for anyone serious about their privacy and demands quality performance.
Manufactured for Security Professionals as a Multi Electronic Frequency Finder (MEFF M1-PRO), this is the new Near Field detector for the TSCM professional or anyone looking for known, unknown, illegal, disruptive, or interfering transmissions.
Designed and built in Italy for Agencies, Military and now available to Businesses, Celebrity and Executive protection details, C-Suite Executives, High net worth individuals. This Analog and digital multifunction detector M1-PRO is designed and manufactured to the highest quality standards possible by and for TSCM Professionals.
M1-PRO has special functions, including the possibility of measuring the distance of the detected signal down to cm. Equipped with an array of antennas such as; laser listening device and infrared microphone detection, thermal antenna for heat detection, Audio Vox bug antenna, GPS antenna, probe to detect micro cameras even if they are switched off, In addition to detecting frequencies up to 20 Ghz analog and digital.
Detecting hidden high-tech surveillance devices used by foreign agencies, terrorists or criminals is now more difficult. However, with the next generation M1-PRO Multiple Detection System, the operator will find hidden devices, be they wireless or wired, using its range of smart probes that are tuned to detect these hidden threats from 0KHz up to 20KHz. GHz. The system takes the operator to the hidden threat with its distance measurement tool that locates the location of hidden transmitters or transmission link such as a GSM LTE 2G 3G 4G 5G WIFI mobile phone Bluetooth and audio or video devices. Real-time analysis data is logged and stored directly in the system for immediate identification of current or historical threats.
M1-PRO Dectects:
Hidden broadcast spy equipment in your home, car, office or any environment
GPS-Lojack locators installed in cars and vehicles
Sending and receiving SMS from mobile phones, Internet access signals from mobile phones
Suspicious radio signals in the environment
Hidden wireless cameras
Mini earphones in transmission
Jammer (signal jammers)
Spying devices also turned off and not powered
Spying devices turned on not transmitting, laser listening devices, GPS Tracking equipment, every type of transmitting listening devices
Applications:
Corporate security surveys for illegal, unauthorized, or threatening transmitters.
Measuring or detecting acoustic leakage or ultrasonic mechanical vibrations.
Detection of all WiFi, bluetooth, cell phones, illicit transmitters, etc. Interference detection and troubleshooting.
Contraband detection in correctional facilities
RF research and development
Wireless industry developers
Hobbyists and RF enthusiasts
Educational institutions.
Perfect equipment for all Private Investigators,
Corporate & Retail Security
TSCM professionals.
Jammer Detection (Disturbers)
Full Band Detector: detects all analog and digital frequencies from 0 to 20 Ghz. It also detects GSM, 2G, 3G, 4G, 5G, LTE, 2.4Ghz / 5Ghz wifi, Bluetooth mobile bands.
GSM 900/1800 MHz: specific function for the detection of classic GPS. Very comfortable in the use of cars.
Wifi: searches for wifi devices in transmission.
Magnet: useful for locating magnetized GPS even when switched off
Spectrum detection from 0 Khz - 20 GHz, covering all communication frequency bands currently used internationally and nationally
Scan speed of 30 microseconds, to ensure that all signals are acquired in real time
Omnidirectional antennas detect signals in every direction
Detection of GPS magnetized off and not powered
The integrated thermographic antenna identifies sources of heat generated by lighted warning devices
The T1 antenna forces the locators in standby and programmed to transmit the signal to be detected
The T2 antenna detects laser microphones and infrared microphones
The T4 probe detects micro cameras on, off, not powered and invisible black infrared cameras (used by spy cameras).
Android APP will give you the possibility to: -
Measure the distance of the detected signals in cm - Measure the detected signal in dB using a graph - Represent the detected signal in cm through the dB on the graph - H24 monitoring of signals with event log - Show on the graph the disturbance detected by a running jammer
Compact portable and lightweight device
Specifications:
Detection mode to be selected on the detector: Full Band Analog and Digital Detector, GPS, Wifi and Magnet.
Thermographic detection to identify hidden spy devices
Detection of turned off micro cameras and occult black infrared cameras
Forced activation mode of GPS and Audio Bugs in Stand bye and programmed in delayed mode Measure the detected signal in dB using the graph + Logger •
Detection of laser and infrared microphones
Sensitivity adjustment to reduce or increase the detection range
H24 monitoring of signals with event log
Lojack GPS Trackers Detection
The signal strength is divided into 16 segments, which can effectively confirm the signal strength and distance of the transmission signal source.
The detection sensitivity is divided into two sections (high and low) ranging from 0 cm to 30 meters (depending on the situation).
Wide field detection with absolute precision
Dynamic range 68 dBm
Modes: beep and mutevice
T1 antenna forces the GPS Tracker locators to wake up from stand bye and programmed to transmit the signal to be detected
T3 antenna forces the audio bugs to wake up from stand bye and programmed to transmit the signal to be detected
T4 probe detects micro cameras on, off, not powered and invisible black infrared cameras (used by spy cameras)
Omnidirectional antennas detect signals in every direction
Directional antenna locates equipment in a specific point
Integrated thermographic antenna identifies heat sources generated by lighted warning devices Height adjustable sensitivity
Working time: 8 hours (based on how it is used)
Power: 1200mW (maximum), 400mW (average)
Input voltage: 500mA 5V
2500mAh high-density lithium battery capacity
Charging interface: TYPE-C
Charging time: 3/4 hours
2.6 inch LCD screen
Materials: Plastic Machined with Finishes and Special Painting
Designed and Made in Italy
Includes:
Military Shockproof Suitcase Case
1 M1-PRO detector
1 Probe (T4)
1 Thermographic Probe
2 Omini directional antennas
1 Directional Antenna
3 Antennas (T1 - T2 - T3)
1 Charging Cable
1 cable for APP Andorid only
Manual
Standard shipping is FREE for all retail orders totaling $100.00 or more! (48 Continental US orders only) Flat rate of $8.50 shipping applies to orders under $100.00
|
4875.00 |
|
|
Orion 2.4 Non-Linear Junction Detector
New Smaller, lighter, 2.4 GHz transmit frequency. A Non-Linear Junction Detector detects the presence of electronics, regardless of whether the electronic target is radiating, hard wired, or even turned off. The ORION 2.4 quickly detects and locates all hidden electronic surveillance devices.
DIGITAL MODULATION & CORRELATION: provides improved detection & minimizes interference.
WIDE BANDWIDTH TRANSMIT SIGNAL: 1.25MHz increases detection sensitivity
MULTIPLE ALERT METHODS: Alert tones and vibration alert can be selected to alert when signal levels surpass the trip levels
LINE OF SIGHT ANTENNA MOUNTED DISPLAY: allows user to focus eyes on sweeping target and display at same time.
2.4 GHz TRANSMIT FREQUENCY: for detecting small electronics
MANUAL OR AUTOMATIC POWER CONTROL: up to 3.3 watts
SMALL LIGHTWEIGHT: weighs 2.8 lbs/1.3 kg
INTEGRATED TELESCOPING POLE
SYNTHESIZED TRANSCEIVER: frequency stability and agility to automatically search for clean operating frequencies (2.404GHz - 2.472GHz).
CIRCULARLY POLARIZED TRANSMIT AND RECEIVE ANTENNA: removes risk of missing a threat due to incorrect antenna polarization.
Specifications:
Display:
Antenna-mounted Display
Bar Graph Display for transmit power level, 2nd harmonic level, 3rd harmonic level, data field display, for other information (operation mode, low battery, volume, DSP gain, etc.)
Transmitter
Frequency Bands: 2.404GHz-2.472GHZ
Transmit Channels: Manual or auto selection, more than 60 available
Transmit Power: 3.3 watts E.I.R.P.
Power Control: Manual or Auto Control
Transmit Modulation: Digital 1.24 MHz BW
Receiver:
Simultaneous 2nd & 3rd harmonic receive Digitally Correlated
Frequency Bands: Transmit Band (2.404GHz - 2.472GHz); Second Harmonic (4.808GHz - 4.944GHz); Third Harmonic (7.212GHz - 7.416GHz)
Sensitivity:140 dBm for both harmonics
Battery Specifications:
Input AC: 100–240 V, 50–60 Hz
Run Time: >8 hours per battery (typical)
Charge Time: 2.5 hours per battery (typical)
Batteries: Lithium Ion Rechargeable Battery (2 included)
Extension Lengths:16-51 in (40.6-129.5 cm)
Overall Length Extended: 58 in (1.5 m)
Case Dimensions: 6.25 in x 14.9 in x 18.5 in (15.9 cm x 37.8 cm x 47.0 cm)
ORION 2.4 Dim: 22.4 in x 3.75 in x 3 in (57 cm x 9cm x 7.5 cm)
ORION 2.4 Weight w/Battery: 2.8 lbs (1.3kg)
Case Weight Including ORION 2.4 & Accessories: 11.6 lbs (5.2kg)
Standard shipping is FREE for all retail orders totaling $100.00 or more! (48 Continental US orders only) Flat rate of $8.50 shipping applies to orders under $100.00.
|
14900.00 |
|
|
Detection and Counter Surveillance Kit
Feel safe, secure and protect your environment and information from outside threats. We've created a detection and counter surveillance kit that will aid and identify surveillance threats of any kind.
No job is too small or too big with this detection kit on hand. Comes standard and nicely organized in tactical case including the iProtect DD1216, DD1207, DD1206, DD1200 and DD12051. Mission ready, this case makes it easy to keep track and transport your detection devices regardless of the job or if you don't need the whole kit you can take whatever you need with you on-the-go. All devices are small and portable in size.
FREQUENCY RANGE: 50MHz-12GHz
Includes:
DD1216: iProtect 3-Band RF Detector [50MHz-12GHz]
DD1207: iProtect Wireless Detector [824MHz-7000MHz]
DD1206: iProtect Digital RF Detector [50MHz-12GHz]
DD1200: iProtect Camera Finder [Finds Non Transmitting Cameras]
DD12051: iProtect RF Wireless Signal Wand [50MHz-8GHz]
The Bug, Camera & GPS Detectors included help assist in sweeping and locating modern (digital) and classic (analog) forms of surveillance devices. Locate hidden cameras, listening devices or GPS trackers that could be invaiding your private space at home, the office or vehicle.
Secure your home, office and vehicles. Each device has specialized features, adjustable settings, threat level indicators to help uncover and find unwanted surveillance devices. Each one designed to search covertly, LED, Sound or Graph Indicators will help you narrow down the search and type of devices to look out for based upon what's registering. Be sure to turn off all authorized devices in the environment to not impead the investigation. All electronics emit a frequency, these anti-surveillance devices will measure and monitor those in range giving off a RF signature of 50MHz-12GHz.
Stronger the singal, closer the device. Detection devices pick up the RF frequencies given off by Cellular, Bluetooth and WiFi spy gadgets that could be hidden in your everyday items. [GSM, 2G, 3G, LTE, Bluetooth, 2.4GHz & 5GHz WiFi and Wi-Max]
Standard shipping is FREE for all retail orders totaling $100.00 or more! (48 Continental US orders only) Flat rate of $8.50 shipping applies to orders under $100.00.
|
2989.00 |
|
|
Road Warrior Kit
Made for those who travel, our Road Warrior kit detects credit card skimmers at gas pumps and ATMs as well as protects you from hidden cameras in hotel rooms or AirBnB rentals. Every day the news is filled with unsuspecting travelers discovering a snoop or spy camera in their hotel room. Approximately 40% of Americans have fallen prey to credit card theft. With the Road Warrior Kit we've combined our two most portable DIY counter surveillance devices into one economical personal protection solution.
In our Road Warrior Kit we've combined our two most popular, portable devices to protect you from identity fraud or breach of privacy.
The first item in this handy travel case is the easy-to-use hidden camera lens finder SpyFinder Pro! Whenever the traveler checks into a hotel, AirbnB, or any overnight accommodation that's not in your own home, use the SpyFinder Pro to sweep the room for any camera. Spy Finder Pro will find hidden cameras regardless of whether they are powered on or off. Protect your privacy in one quick sweep.
The next item included in the Road Warrior kit is the deScammer credit card skimming detection device. Many travelers are victimized while on the road by credit card skimmers installed at gas pumps. These skimmers swipe your credit card info and send it via bluetooth transmission to the thief who can scarf up thousands of credit cards in one day! But deScammer is your early warning system against these criminals. Before filling up your tank, just aim the deScammer at the pump; press the button once; and wait for the light to turn green to tell you the credit card machine on the pump is safe. If the light turns red, beware! deScammer has detected the presence of a bluetooth transmission waiting to steal your credit card info. Use the deScammer to check any point of sale including ATMs. One touch and you'll feel secure knowing your credit is safe to swipe or insert.
Always feel protected with the Road Warrior detection Kit!
Specifications:
SEE SF-103P and DD1100 product pages for Specs
Dimensions: 7” L x 7” W x 5” H
Weight: 10oz
Includes:
1x Spyfinder Pro
1x deScammer
Spyfinder Pro Instruction Manual
Screw Driver
Extra Screws
2 x AAA Batteries
Standard shipping is FREE for all retail orders totaling $100.00 or more! (48 Continental US orders only) Flat rate of $8.50 shipping applies to orders under $100.00.
|
248.99 |
|
|
iProtect Detection Wand
The iProtect 1215 brings powerful handheld detection to the DIY user. Conventional RF detectors are typically capable of discovering signals up to 4-6 GHz. Higher frequencies generally stay unstudied during sweeping procedures, unless you've invested in an expensive spectrum analyzer. This small, handheld microwave pointer-probe extends the checked frequency range during sweeping procedures up to 13 GHz.
When you are looking for High frequencies the iProtect will get the job done!
Features:
Detects bugging devices omitted by standard RF detectors
Discovers microwave signals in the range of 4-13 GHz
Detects signals not depending on their type – video, audio, digital or analogue
Built-in directed antenna
3 working modes: Normal, Vibrating and Audio
16-segment indicator for easy and precise pinpointing of the bugging device
Sensitivity controlled by attenuator
Antenna's directivity (out-of-direction attenuation) -6 dBm
Portable and durable duralumin body
Powered by just 1 AA (LR06) battery
Low power indication
Battery resource 12-25 hours
Typical signals Detected by iProtect DD1215 are Wireless microphones working on 5 GHz frequency band, Wireless video cameras 5GHz, Covert 5GHz Wi-Fi access point, Covert 5GHz Wi-Fi client device, Other surveillance (bugging devices) employing frequencies between 4-13 GHz.
Great for small sweep areas, all TSCM professional should have one their arsenal.
Specifications:
Frequency range 4000 – 13000 MHz (4-13 GHz)
Controls Power button, Mode button, ATT button
Indicators 16-segment bargraph, Vibration, Battery state (3 colors), Working mode, ATT state
Battery resource 12 – 25 hours
Current consumption Normal: 80 mA Vibrating: 180 mA Audio: 130 mA
Power source 1 x AA battery
Included:
Manual
2 AA Batteries
Standard shipping is FREE for all retail orders totaling $100.00 or more! (48 Continental US orders only) Flat rate of $8.50 shipping applies to orders under $100.00.
|
395.00 |
|
|
Video Pen with Motion Detection
There are lots of Pen Camera recorders on the the market today but there are not a lot of quality Pen Camera recorders. With our Pen Camera you get clear true HD quality recording, motion detection and a functioning realistic pen. One touch turns it on or off making it easy to capture video on the go. Our Pen Camera can hold up to 128 GB memory card and has an easy slide on the back to choose between motion or continuous recording modes.
If you are looking for quality over price our Pen Camera is the perfect choice and is packed with great features!
HD (720P) Video recording 1280x720
Two recording mode continuous ( 1 hour) or Battery saving motion detection recording (1.5 hours on internal battery)
The LED lights turn off for Covert recording
Perfect for body worn surveillance
One touch turns the unit of and one
Date and Time stamp
Easy playback and storage using USB
Store using micro TF card up to 128 GB (not included)
Use the USB cable to for extended recording or surveillance time
Great for body worn surveillance, sports videos, Law enforcement, PI's, concerned parents
Specifications:
Video Formate: MJPG
Bit Rate: 16.4 Mbps
Frame Rate Max 30fps
Battery power indicator
Battery Rechargeable Lithium Polymer
Battery Charging time 1.5 hours
Memory up to 128 micro TF Card
Recording times 2 hrs/16GB , 4 hrs/ 32GB; 8 hrs/64GB, 16hrs/128GB
Video Resolution: 1280x720
Included:
USB Cable
1 pen refill
manual
Standard shipping is FREE for all retail orders totaling $100.00 or more! (48 Continental US orders only) Flat rate of $8.50 shipping applies to orders under $100.00
|
149.00 |
|
|
Rabbler Noise Generator Kit
Protection just got 4xs better with this rapid deployment kit. Protect from eavesdropping using the NG3000. The Rabbler creates an additional barrier of noise interference making it possible to mask your conversation when confidentiality is necessary.
The best selling portable, handheld noise generator is now in a kit of 4.
4 Rabblers in a water proof, rugged case for easy transport and deployment no TSCM professional should be with out this kit in there arsenal.
The NG3000 Rabbler creates additional barrier interference which masks your speech. It is when a certain noise level is reached that listening devices will record or transmit information, it is extremely difficult, or impossible, to extract the speech component. Since the generator creates a 'speech-like' noise, the cleaning of this sound is extremely difficult or most likely impossible, if the level of noise is sufficient. Thus defeating the hidden microphone.
The housing of the unit is made from rugged material and is extremely durable, guaranteeing a long life for the device.
Helps Mask
Voice recorders
Radio microphones
GSM/3G “bugs”
Body-carried video cameras - watches, ties, etc. (jamming of acoustics)
Wired microphones
Any other type of audio surveillance
Please note that the NG3000 Rabbler is just a tool, complementing and reinforcing the measures taken to protect you from eavesdropping and recording. First of all the security of your conversation depends on yourself, and later from the device. Therefore, during sensitive negotiations it is important not to increase the volume of your voice. Imagine that you are sitting in a crowded coffee shop and do not want to be heard by the people at the next table; that means your speech should not be too loud. If possible, lean forward towards the person you are speaking to or sit closer to each other, then place the generator on the table between you.
It is not advisable to use only one NG3000 Rabbler if the number of participants is more than 4. In this situation, it may be necessary to use one or two additional devices. Also, while in use do not hide your generator, e.g. in your pocket or a bag! Your conversation should be "drowned" in noise; therefore the unit should be as close to the speakers as possible.
Specifications:
Unit Size 2 x 3.25 x .75
Indicators: Power, Volume, Level
Controls: Power and Volume
Power 9V
Frequency Range 300 Hz-3600 Hz
Included:
Manual
Leather Case
4x 9V Battery
4 x Rabbler Generator
Standard shipping is FREE for all retail orders totaling $100.00 or more! (48 Continental US orders only) Flat rate of $8.50 shipping applies to orders under $100.00.
|
1469.00 |
|
|
Pro-10G Cell Phone and GPS Bug Detector
When you need a detection device that is capable of honing in on a camera, GPS tracker that has been planted on your vehicle, or a tapped land line, look no further. The DD804 offers more than one feature for zeroing in on your threats so that you are armed with ability to remove them. You're looking at the latest model of The Hunter camera detector. This is a professional camera and wireless tap sweeping device that will not let you down.
Features
Detects all GSM Bugs including Baby-Monitors/GSM Alarm/GSM Bugs
Detects all Cellular GSM/GPRS/EDGE/3G/4G Video Cameras & Listening Bugs
Detection Frequencies: GSM 880-915MHz, CDMA 824-849MHz, WCDMA (1920-1980MHz), and DCS (1710-1785MHz)
Detects Transmitting Spy Phones
Detects GPS Trackers while Transmitting
Detects Bluetooth Active Bugging Devices
Detects Spy Phones with Active Bluetooth/Wi-Fi
Ultra Sensitive will detect signals from up to 40 feet
Features 10 bar strength display
Technical Specs
Radio Frequency Response 10MHz ~ 10GHz
Analog, Digital, WiFi, Cellular GSM/GPRS/EDGE/3G/4G signals all will set off alarms.
Detection Frequencies: GSM 880-915MHz, CDMA 824-849MHz, WCDMA (1920-1980MHz), and DCS (1710-1785MHz)
Digital ‘Burst’ Signal Detect for all GSM/3G/4G Trackers/SMS(Text) detection
Detects:
Series and Parallel transmitters
Transmitting GPS trackers (only when GPS device is transmitting signal location)
Devices on internet phone and IP phone
Prevents:
Wire telephone tapping
Laser tapping using a white noise generator
Recordings of a voice recorder, tape, digital and parabolic reflector using white noise generator
Product Dimensions: 2.25" x 4.75" x 1.00"
Includes
Detection Device Unit
Telephone Line Adaptor
Head Set
1-9 Volt Battery
Quick start guide and instructions
Standard shipping is FREE for all retail orders totaling $100.00 or more! (48 Continental US orders only) Flat rate of $8.50 shipping applies to orders under $100.00
|
339.95 |
|
|
Pro Camera Finder
The removal of a hidden camera threat is made easier with this durable, professional grade camera lens finder. The DD1200 is the highest grade camera lens finder available and was designed specifically to remove hidden camera that other detectors cannot find. The high powered adjustable LED's enable long and short range camera lens detection beyond what any other lens finder is capable.
Features
Detection of all types of hidden video cameras not depending on their working state
Distance of detection between 2 and 10 meters.
IR filter for rejection of natural reflections
Adjustable brightness with bargraph
Low battery indicator
Durable metal
Detection distance up to 60 Fee
Specifications
Detection distance up to 60 Ft.
Adjustable power of radiation
Powered by 2 AAA batteries
Detection of all types of hidden cameras working or not
distance detection between 2 and 10 meters
Batterty discharge indicator
Box Size 7 x 5 x 1.50
Weight .65
Item Size 5.5 x 1.25 x .50
IR Filter for rejection of natural reflections
Includes
Manual
Screw Driver
Cleaning Cloth
2 Batteries size AAA
Detector
Download Manual
Standard shipping is FREE for all retail orders totaling $100.00 or more! (48 Continental US orders only) Flat rate of $8.50 shipping applies to orders under $100.00
|
445.00 |
|
|
Delta S Counter-Surveillance Sweeping System
Both Easy to learn and powerful the Delta S is a sweeping system that quickly and reliably detects all types of RF surveillance device up to 6GHz. The spectral analysis provides high sensitivity and a long detection distance of more then 10 to 20 times that of other RF detectors and near-field receivers. Plus the Delta S has a special mode to detect cellular jamming devices.
Quickly and reliably detects all types of RF surveillance devices in the range up to 6 GHz, including analog, digital, working continuously and periodically, transmitting audio or video, with or without encryption
Finds and identifies covert surveillance devices which use the digital standards GSM, 3G, 4G / LTE, 5G, Bluetooth, Wi-Fi, DECT and others in the range up to 6 GHz
Analyzes Wi-Fi 2.4 GHz, Wi-Fi 5 GHz, Bluetooth, “Bluetooth LE” and “Bluetooth LE Advertising” channels
The background masking feature allows you to reject friendly signals such as television, radio, mobile base stations, etc., and focus on finding local signals that pose a danger
Can be quickly adjusted to the local frequency allocation in the country of use (mobile and wireless bands)
High-speed spectrum updating and wide real-time bandwidth (RTBW) provide the ability to register short-burst signals
Search modes include: "All Signals", "Mobile/GPS trackers", "Wireless/ISM" and "Custom", as well as two additional modes for the inspection of suspicious bands or signals
Two antenna inputs and built-in antenna switch provide maximum sensitivity over the entire frequency range
Unlimited number of logs, each can contain an unlimited history of events
Unlimited number of logs, each can contain an unlimited history of events
The audio alarm warns the user about the presence of danger with a sound of variable intensity
The attenuator simplifies location of powerful transmitters
The "Hold maximum danger" feature automatically displays the most dangerous band or signal
Demodulation of audio in AM/FM mode
Works with, and is powered by, a laptop or tablet (not included)
Has convenient magnetic system for attaching the laptop / tablet to the main unit
Specifications:
Frequency range 57-6000 MHz
Sweeping speed 8 GHz per second
ADC resolution 12 bit
Sensitivity -85 dB
Dynamic range 80 dB (with attenuator)
Displayed signal level -90…-10 dB
Real-time bandwidth (RTBW) 27 MHz
Format Handheld unit
Platform SDR by Analog Device Antenna inputs INPUT 1 – SMA, 57-2000 MHz INPUT 2 – SMA, 2000-6000 MHz
Searching modes and time of update • All signals (~0.8 s) • Mobile/GPS trackers (~0.2 s) • Wireless/ISM (~0.3 s) • Inspect band/signal (~0.1-0.2 s)
Visual elements (panels) • Level • Spectrum + Waterfall • Alarms
Demodulation AM and FM with bandwidth 5, 15, 30, 100 and 200 kHz (in the range 70-6000 MHz)
Requirements for laptop / tablet Intel Core і3 / AMD Ryzen 3 or better (recommended Intel Core i5 / AMD Ryzen 5) 2 USB ports, one should be of SuperSpeed type (USB 3.0/3.1/3.2 or USB Type C) RAM 8 Gb or more SSD 128 Gb or more Windows 8,10,11. Screen size 12-14”
Powered by USB-port of laptop / tablet
Battery resource 1-1.5 hour
Duration of work from AC Unlimited
Displayed spectrum span 2 - 6000 MHz
Range of working temperature -5°C…+45°C / 23°F … 113°F
Signal Strength
5G
GPS
CDMA
GSM
Bluetooth
Wi-Fi
LTE
Analog Signals
Digital Signals
3G
4G
Detection Range
Up to 6 Ghz
Shipping Dimensions:
20" x 16.5" x 8.25"
Shipping Weight
18 Lbs
Included:
Main unit
Carry case
USB drive with software and user manual
1- Omni-directed wideband antenna ODA-4
1- Microwave antenna MWA-6 1
1- Microwave antenna LPDA-12 4
4- Magnetic sticker for laptop or tablet
2- Adapter USB type C – USB type A
Download Delta S manual
Standard shipping is FREE for all retail orders totaling $100.00 or more! (48 Continental US orders only) Flat rate of $8.50 shipping applies to orders under $100.00.
|
11990.00 |
|